724591
24
Zoom out
Zoom in
Previous page
1/44
Next page
196cc 4 Stroke Petrol Lawn Mower
AFTER SALES SUPPORT
e-mail: info.aldi@positecgroup.com
1300 889 028
MODEL No.: SLM464 • 02/2020 • 700304
(toll free)
22
Assembly of the Hard Catcher
The hard catcher (41) is supplied in 2 sections.
Locate the top half of the catcher on top of the
bottom half and interlock them together by
aligning the clips on the top half of the catcher
into the raised ridge around the bottom half of the
catcher, then push the halves together until they
click into place. (Fig I)
Attaching the Hard Catcher
1. Lift the rear discharge guard (16) in order to
position the assembled hard catcher (41).
NOTE: Do NOT ever start the lawn mower if the
rear discharge guard does not fully return to the
close position if the catcher is not tted.
2. Attach the hard catcher (41) by aligning the
catcher attachment bar (14) on the catcher over
the catcher attachment bracket (15) centrally so
the catcher is sitting evenly.
3. Release the rear discharge guard (16) to secure
the hard catcher (41) into place. (Fig J)
NOTE: Always empty the catcher before it has
reached maximum capacity, otherwise it will
decrease the performance of the lawn mower.
TIP: Do not leave grass clippings in the catcher
for extended periods of time.
I.
J.
Assembly of the Side Discharge Chute
WARNING: Ensure the engine is NOT operating when tting the side
discharge chute (20).
Do not operate or have the engine running when the side ejector cover is
opened and the discharge chute is not tted.
NOTE: The side discharge chute (20) is used to distribute grass clippings
from the side of the mower while the mower is in use. To use this function,
the hard catcher (41) is NOT required to be assembled on the lawn mower.
24


Need help? Post your question in this forum.

Forumrules
1

Forum

ferrex-slm464

Reset search

  • Mower won’t turn off normally.
    How to turn off manually, please. Submitted on 2-12-2022 at 04:59

    Reply Report abuse
  • Gidday how to clean air filter onSLM31 mower thanks
    Submitted on 18-10-2022 at 03:32

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferrex SLM464 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferrex SLM464 in the language / languages: English as an attachment in your email.

The manual is 8,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info