724595
9
Zoom out
Zoom in
Previous page
1/40
Next page
chine away from the area of spillage and avoid creating any source of igni-
tion until the fuel has evaporated and the vapour dispersed.
– Replace all fuel tanks and containers caps securely.
Substitute faulty silencers.
Before use, always inspect the machine and check that the screws are not
worn or damaged.
It is advisable to wear suitable eye protection (safety glasses) ear protec
-
tion, and sturdy gloves when operating the blower.
Always check for any objects that may block the air intake screen before
beginning work. A clogged air intake reduces the machines blowing ca
-
pacity and increases the engines working temperature, which can result in
engine failure. Stop the engine and remove the object.
Maintenance and storage
Keep all nuts, bolts and screws tight to be sure the equipment is in safe
working condition. Regular maintenance is essential for safety and perfor
-
mance.
Never store the equipment with fuel in the tank inside a building where
vapour may reach a ame or a spark or a source of extreme heat i.e a water
heater.
Allow the engine to cool before storing in an enclosed space.
To reduce the re hazard, keep the engine, exhaust silencer, battery
compartment (if applicable) and fuel storage area free of grass, leaves, or
excessive grease.
If the fuel tank has to be drained, this should be done outdoors and when
the engine is cool.
For reasons of safety, do not use the equipment with worn or damaged
parts. Parts are to be replaced and not repaired. Parts that are not of the
same quality can damage the equipment and be dangerous for your
safety.
Fuel goes o fairly quickly. If you nd your blower does not start, rst
change the fuel in the tank with newly purchased fuel.
Service
Have your power tool serviced by a qualied repair personnel using only
7
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferrex SBV521 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferrex SBV521 in the language / languages: English as an attachment in your email.

The manual is 5,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info