724593
27
Zoom out
Zoom in
Previous page
1/44
Next page
AFTER SALES SUPPORT
(toll free)
e-mail: info.aldi@positecgroup.com1300 889 028
MODEL: №. SBC52 • 02/2020 • 700710
52cc 2 Stroke Brushcutter / Line Trimmer
25
Advancing the line manually
NOTE: Always ensure the engine is turned o before
undertaking this task.
1. Push the bump knob (34) in while pulling on both
lines to manually advance the line. (Fig. AG)
2. Release the bump knob and again pull on both
lines to advance the line further. (Fig. AH)
3. If the line still does not advance remove the spool
and check the lay of the line. It may be twisted or
trapped under over laying line.
Feeding the line
The line trimmer has a bump feed mechanism which
releases the line without having to stop the engine.
1. To release additional line increase the speed of
the motor to no less than half speed, then, lightly
tap the bump knob (34) on the ground while
operating the unit at high speed.
NOTE: Always keep the line fully extended for optimum cutting
performance. Line release becomes more dicult as the cutting line
becomes shorter. Cutting eciency also decreases as the line
becomes shorter.
The line will not extend if the speed of the spool is not operating at least
half speed. If the line does not extend, increase the speed to full speed
while tapping the bump knob on the ground. If the line still does not
extend, stop the motor and check the line inside the spool has not tangled
and also ensure there is sucient line in the spool.
2. Each time the head is bumped it releases approximately 2cm of line.
Release the line until it strikes the cut o knife (32). This may require
several taps.
NOTE: The cut o knife (32) on the clip-on line trimmer guard attachment
(33) will automatically cut o any excess line. For best results tap the head on
AG.
AH.
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferrex SBC52 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferrex SBC52 in the language / languages: English as an attachment in your email.

The manual is 6,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info