724593
11
Zoom out
Zoom in
Previous page
1/44
Next page
concrete, fencing, wire, wood, metal, etc.
Never use blades near footpaths, fencing, posts, buildings or other
immovable objects.
Never use a blade after hitting a hard object without rst inspecting
it for damage. Do not use if any damage is detected.
The unit is used as a scythe, cutting from the right to the left in a
broad sweeping action from side to side.
Always wear goggles, earmus and a dust mask when using the
Brushcutter.
Only use blades with a cutting diameter of 255mm and a bore size
of 25.4 mm.
Only use the Brushcutter with the correctly supplied and tted
Brushcutter guard.
Keep bystanders a minimum of 15 metres from the operation of the
Brushcutter.
Prior to operation, ensure the assembled Brushcutter is checked for
loose components and the operating controls of the Brushcutter.
Do not use the Brushcutter if the controls are not in perfect working
order. Ensure all nuts, bolts and clamps are all tight.
Check the blade is correctly seated and the blade nut is tight.
DO NOT substitute the blade with any other types of blade other than
that is detailed in this manual. DO NOT t a saw blade to this product.
This brushcutter is tted with a centrifugal clutch. At idle, the blade
must not be rotating. Make a practice to always check the clutch is
correctly operating and at idle the blade does not rotate, and rotation
of the blade only occurs as the speed of the motor is increase from
manually operating the speed trigger.
Do NOT use the brushcutter if the blade at idle speed is rotating and
take it to an authorised service centre.
Exercise extreme caution when using the 3T brushcutter blade with
this unit. Blade thrust is the reaction which may occur when the
spinning 3T brushcutter blade contacts anything it cannot cut.
This contact may cause the 3T brushcutter blade to stop for an instant,
and suddenly “thrust the unit away from the object that was hit.
This reaction can be violent enough to cause the operator to lose
control of the unit. Blade thrust may occur without warning if the
blade snags, stalls or binds. This is more then likely to occur in areas
where it is dicult to see the material being cut.
9
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferrex SBC52 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferrex SBC52 in the language / languages: English as an attachment in your email.

The manual is 6,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info