779776
30
Zoom out
Zoom in
Previous page
1/39
Next page
Useful work tips
The following information helps you to achieve the best possible
results when working with the device:
- It allows you to screw threaded screws into soft woods
without pre-drilling. For other woods, we recommend pre-
drilling the hole, especially in the case of large screw
diameters.
- Countersink the drill holes if you want to use countersunk
screws.
- When using screws without a continuous thread, pre-drill
approximately half the screw length.
Screwing
1. Insert a bit (see section Inserting bits).
2. Set the torque selector
14
(see section Setting the torque).
Start with a slow speed and increase this as required.
3. Set the desired rotational direction with the left/right rotation
switch
7
.
4. Insert the bit straight into the slot and/or the slots of the
screws.
5. Press the ON/OFF switch
11
to turn the device
1
on.
6. To stop screwing, let go of the ON/OFF switch.
7. Let the device and the accessories cool down completely once
you have finished your work.
8. Remove the bit.
Operation
30
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferrex S019 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferrex S019 in the language / languages: English as an attachment in your email.

The manual is 1.06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info