779790
12
Zoom out
Zoom in
Previous page
1/18
Next page
Kapitelüberschrift
16
Working with the demolition breaker (Fig. 1)
Hold the demolition breaker during the task with both hands on the handles
and with a firm grip.
Only apply light pressure to the chisel (12/13). The chisel mechanism of the demo-
lition hammer is activated when light pressure is applied to the working surface
with the chisel (12/13).
Maintenance and Cleaning
m WARNING! Risk of injury! Switch off the appliance and pull out the power plug
before starting any work on the appliance.
The handles, ventilation slots and the motor housing must always be kept clean,
dry and free from oil or grease.
Use a soft, dry cloth to clean the housing.
Make sure that the ventilation slots are not obstructed.
Clean the tool holder (6) regularly:
Before fitting a tool into the tool holder (6), grease it lightly.
m WARNING!
If the cord of the power tool is damaged, it must be replaced with a specially de-
signed cord that can be purchased through our Customer Service.
Topping up the oil (Fig. 1 / 3)
Note
Before operating the appliance, check whether there is enough oil in the appliance
(see section “Checking the oil level”). Operation without sufficient oil will cause irrep-
arable damage to the appliance.
If you have ascertained that there is no oil in the oil inspection window (3), you need
top up the oil:
Lay the appliance on a flat surface with the oil inspection window (3) facing up-
wards.
Use the supplied assembly (10) wrench to remove the oil inspection window (3)
from the housing.
Pour the oil (not included) with help from the oil bottle (11) into the opening until it
is 1 cm below the lip.
Replace the oil inspection window (3) and screw it tight using the assembly wrench
(10).
Check the fill level as described in the section “Checking the oil level”.
Use/Maintenance and cleaning
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferrex PH1700 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferrex PH1700 in the language / languages: English as an attachment in your email.

The manual is 1.62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info