724588
12
Zoom out
Zoom in
Previous page
1/17
Next page
Glue Gun
AFTER SALES SUPPORT
(toll free) MODEL No.: PGG40G • 05/2020 • 701256
e-mail: info.aldi@positecgroup.com
AUS
9
1300 889 028
AUS
Gluing
1) Press the flow control trigger (5).
2) Apply the glue in dots around the edges of the workpiece
surface. For gluing flexible materials (e.g. textiles), apply the
glue in a zig-zag line.
Danger of burning! The glue and the nozzle tip are heated to
200 °C.
Do not allow the hot glue to come into contact with
persons or animals. If hot glue touches the skin, immediately hold
the spot for several minutes under a stream of cold water. Do not
try to remove the glue from the skin.
3) After applying the glue, press the surfaces to be glued
together immediately for a stronger bond.
4) Press the glued surfaces together for approximately 30
seconds. To assist with adhesion, apply a weighted load or
clamp to the glued junction for approximately 5 minutes.
5) Between individual gluing actions, place the gun on the
support stand / rest (6) .
6) Remove glue residue after cooling with a sharp knife. The
glued junction can be separated again by heating. The glued
junction can be painted.
WARNING: Do not place the heated glue gun on the
support stand or have the nozzle pointed downwards
for a long period of time when using! The glue will
continue to slowly flow from the nozzle!
WARNING: The glue gun should be switched off and
allowed to cool down after 12 hours continuous use.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferrex PGG40G at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferrex PGG40G in the language / languages: English as an attachment in your email.

The manual is 1,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info