724590
22
Zoom out
Zoom in
Previous page
1/40
Next page
20
Digital Inverter Generator with Pure Sine Wave
AFTER SALES SUPPORT
e-mail: info.aldi@positecgroup.com 1300 889 028
MODEL: №. XG-KF2000 • 03/2020 • 700069 (toll free)
AFTER SALES SUPPORT
(toll free)
e-mail: info.aldi@positecgroup.com1300 889 028
Digital Inverter Generator with Pure Sine Wave
MODEL: №. XG-KF2000 • 03/2020 • 700069
4. Tilt the generator forwards (Fig F), so that the oil can drain from the oil
reservoir into the oil pan through the oil drain tube.
5. When completed draining, remove the oil drain tube by rotating in an
anti-clockwise direction. Reinstall the oil ller cap/dipstick (12) and rotate
in a clockwise direction until secure.
6. Refer to the previous instructions on page 18 for
“Filling and checking the engine oil” to rell the
oil reservoir.
CAUTION. Check that no foreign material, debris,
dust enters the crankcase.
7. Ensure to replace the oil ller cap/dipstick (12)
after relling with fresh oil by securing it in a
clockwise direction.
Method 2
1. Place the generator on a at and level surface and warm up the engine
for several minutes. Then stop the engine.
2. Place an oil pan at the front of the generator ensuring it is in front of the
oil ller cap/dipstick (12) area. Commence removing the oil ller cap/
dipstick (12) by rotating in an anti clockwise direction to remove, so that
the oil can be completely drained from the oil reservoir.
WARNING: Oil may be warm to hot. It is recommended to wear gloves
for protection.
3. Using a 13mm spanner (not supplied), loosen the oil drain plug screw
(33) in an anti-clockwise direction until loose, then remove.
4. Tilt the generator forwards, so that the oil can drain from the oil reservoir
into the oil pan.
5. When completed draining, re install the oil drain plug screw in a
clockwise direction until secure. Reinstall the oil ller cap/dipstick (12)
and rotate in a clockwise direction until secure.
I.
F.
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferrex KF2000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferrex KF2000 in the language / languages: English as an attachment in your email.

The manual is 3,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info