779779
22
Zoom out
Zoom in
Previous page
1/38
Next page
18 AFTER SALES SUPPORT
support@scheppach.com.au 1300 855 831
MODEL: HL520 PRODUCT CODE: 700726 04/2021 AUS Hotline Costs: Local rate for landline calls*
*Charges may var y dependent upon net work operator or mobile network provider.
AUS
Safety regulations
All persons and animals must be kept at least 5 meters from the
machine while it is working.
Never modify the protective equipment on the wood splitter or carry
out any work without such equipment attached.
Never attempt to force the wood splitter to split excessively hard
pieces of wood under cylinder pressure for more than 5 seconds.
Overheated oil under pressure may cause damage to the machine.
Stop the machine, turn the trunk through 90° and then try to split it
again. If the wood still fails to split this means that it is too hard for
the capacity of the machine and must be removed to avoid damag-
ing the wood splitter.
Never leave the machine unattended while running. Stop the ma-
chine and unplug the power plug whenever you are not using it.
Never use the machine near natural gas, petrol channels or other
inammable materials.
Never open the control box or the motor cover. If necessary, contact
a qualied electrician.
Make sure that the machine and the cable never come into contact
with water. Handle the power cable with care and never pull or tug it
with a jolt to unplug it. Keep all cables away from excessive heat, oil
and sharp-edged objects.
Please take note of the temperature conditions whilst you work.
Extremely low and extremely high ambient temperatures may cause
malfunctions.
Before using the log splitter for the rst time, users should be given
practical training by an experienced operator and should initially
work with it under supervision.
Before starting work check the following:
Do all the functions of the tool function correctly?
Does all the safety equipment function correctly?
Can the tool be switched o󰀨 correctly?
Is the tool adjusted correctly (truck support, trunk holding plates)?
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferrex HL520 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferrex HL520 in the language / languages: English as an attachment in your email.

The manual is 1.41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info