734931
24
Zoom out
Zoom in
Previous page
1/30
Next page
Troubleshooting
24
Troubleshooting
Problem Possible cause Solution
The rotary ham-
mer drill cannot
be started.
It is not connected to the
mains. The mains plug is not
inserted in the socket.
The mains plug or mains
cord
4
is damaged.
Connect it to the mains. Insert
the mains plug into the socket.
Have the defective mains plug/
defective mains cord replaced
by a qualified workshop.
The tool does not
fit in the chuck.
Wrong tool/wrong chuck.
Use or remove the keyed
chuck
15
(see chapter “Insert-
ing a tool”).
The tool/chuck is
not rotating.
The selector switch
1
has
not been set correctly.
Press the release button and
turn the selector switch to the
symbol indicating “Drilling
without the hammer function”
or “Hammer drilling”.
The drill bit
12
does not pene-
trate the material
to be drilled into.
The hammer function has
been deactivated.
Wrong drill bit.
Press the release button and
turn the selector switch
1
to
the symbol indicating “Hammer
drilling”.
Use a rock drill bit for hammer
drilling.
Use the keyed chuck
15
and a
metal drill to drill into metal. In
this case, switch the hammer
function off.
The chisel
11
is
not moved.
The hammer function has
been deactivated.
Press the release button and turn
the selector switch
1
to the
symbol indicating “Chiselling”.
The chisel
11
is
rotating.
Chiselling mode has not
been selected.
Attention! Risk of kickback! You
must press the release button
and turn the selector
switch
1
to the symbol
indicating “Chiselling”.
24


Need help? Post your question in this forum.

Forumrules
1

Forum

ferrex-fpb-1500

Reset search

  • Je n'arrive pas à mettre le sélectionneur de fonction sur l'apposition de perçage ! Submitted on 11-11-2022 at 10:07

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferrex FPB 1500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferrex FPB 1500 in the language / languages: English as an attachment in your email.

The manual is 1,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ferrex FPB 1500

Ferrex FPB 1500 User Manual - German - 31 pages

Ferrex FPB 1500 User Manual - Dutch - 31 pages

Ferrex FPB 1500 User Manual - French - 32 pages

Ferrex FPB 1500 User Manual - Portuguese - 32 pages

Ferrex FPB 1500 User Manual - Spanish - 31 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info