734931
18
Zoom out
Zoom in
Previous page
1/30
Next page
Operation of the rotary hammer drill
18
Removing a tool
1. Tool without keyed chuck
15
:
Push the retaining bush
6
back to remove the tool.
2. Tool with keyed chuck:
Use the chuck key
14
to open the keyed chuck and remove the tool. Push the
retaining bush
6
back to remove the keyed chuck.
Mounting and adjusting the depth stop
1. Loosen the wing screw
9
on the extra handle
5
until the depth stop
10
can
be inserted in the clamping opening.
2. Pull the depth stop up to the tip of the inserted drill bit
12
.
3. Push the tip of the drill bit and depth stop up against a flat surface and push the
depth stop back by the desired drilling depth.
4. Fix the setting by tightening the wing screw. The front end of the depth stop will
come into contact with the respective base once the set drilling depth is reached.
5. Drill a test hole if necessary.
Setting the extra handle
1. Loosen the extra handle
5
by turning it anticlockwise and turn it around the drill
axis to a convenient lateral working position.
2. Turn the front handle clockwise to fix it in place.
Operation of the rotary hammer drill
WARNING!
Risk of accident and injury!
There is a risk of accident and injury in the event of accidental activation/
deactivation when inserting and removing tools as well as when transporting
and cleaning the rotary hammer drill.
Before inserting and removing tools, pull the mains plug to prevent the
rotary hammer drill from accidentally activating.
Never touch the inserted tool while it is still rotating.
18


Need help? Post your question in this forum.

Forumrules
1

Forum

ferrex-fpb-1500

Reset search

  • Je n'arrive pas à mettre le sélectionneur de fonction sur l'apposition de perçage ! Submitted on 11-11-2022 at 10:07

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferrex FPB 1500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferrex FPB 1500 in the language / languages: English as an attachment in your email.

The manual is 1,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ferrex FPB 1500

Ferrex FPB 1500 User Manual - German - 31 pages

Ferrex FPB 1500 User Manual - Dutch - 31 pages

Ferrex FPB 1500 User Manual - French - 32 pages

Ferrex FPB 1500 User Manual - Portuguese - 32 pages

Ferrex FPB 1500 User Manual - Spanish - 31 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info