734931
15
Zoom out
Zoom in
Previous page
1/30
Next page
Safety
15
Immediately switch the rotary hammer drill off if the fitted tool jams. A tool
that jams can trigger kickback.
Never use the rotary hammer drill as a screwdriver when hammer drilling.
It is prohibited to tighten and loosen screws, nuts and the like when
hammer drilling.
WARNING!
Risk of injury!
Failure to follow the warning notes can result in injury.
Store the rotary hammer drill in an area that is not accessible for children.
Wear suitable protective clothing! Wear protective goggles and a
protective helmet to protect yourself against airborne particles and
splintered debris.
Set up partitioning walls to protect nearby persons from airborne particles
and splintered debris.
Wear work gloves to prevent your fingers from being crushed and to
prevent skin abrasions.
Only connect the rotary hammer drill to the power supply after it has been
switched off.
Make sure that the rotary hammer drill’s switch is set to the position that
corresponds to the type of work you intend to perform.
Only start the rotary hammer drill when it is pressed against a workpiece
(wall, ceiling etc.).
Disconnect the rotary hammer drill from the mains once you have finished
work.
Never touch the outer casing directly after drilling. It becomes very hot
when drilling.
Before performing work, always check whether the chisel or the drill bit
are correctly secured in the tool holder.
Check the tool holder regularly for wear or damage.
Never remove dust, chips or splinters while the motor is running.
Secure small workpieces so that they are not pulled along by the drill bit
when drilling.
15


Need help? Post your question in this forum.

Forumrules
1

Forum

ferrex-fpb-1500

Reset search

  • Je n'arrive pas à mettre le sélectionneur de fonction sur l'apposition de perçage ! Submitted on 11-11-2022 at 10:07

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferrex FPB 1500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferrex FPB 1500 in the language / languages: English as an attachment in your email.

The manual is 1,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ferrex FPB 1500

Ferrex FPB 1500 User Manual - German - 31 pages

Ferrex FPB 1500 User Manual - Dutch - 31 pages

Ferrex FPB 1500 User Manual - French - 32 pages

Ferrex FPB 1500 User Manual - Portuguese - 32 pages

Ferrex FPB 1500 User Manual - Spanish - 31 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info