724612
32
Zoom out
Zoom in
Previous page
1/42
Next page
47.1cc Petrol Chainsaw
AFTER SALES SUPPORT
1300 889 028
(toll free)
e-mail: info.aldi@positecgroup.com
MODEL: №. 10084 • 08/2019 • FCS4800A
30
Air Filter:
1. Remove the air lter cover (15) by rotating the
air lter knob (16) in an anti-clockwise direction,
and removing the air lter cover (15) (Fig AM).
2. Disconnect the black pipe from the cylinder
cover (Fig AQ), and then also from the air lter
itself.
3. Grasp the sides of the air lter (14) and pull it
outwards (Fig AR).
4. Dry particles can be removed by tapping on a
hard surface. More stubborn dirt may require
washing the air lter (14) with warm soapy
water and a soft brush.
5. After thoroughly drying the air lter (14),
re-install the black pipe onto the air lter from
where it was removed, and re-insert the air
lter back in place. Re-attach the black pipe
back onto the cylinder cover, and ensure all is
secure in place. Replace the air lter cover (15),
and secure the air lter knob (16) in a clock wise
direction to secure the air lter cover (15) back
in place.
Guide Bar:
1. Take o the guide bar (19) and maintain it by
removing any sawdust from the groove in the
guide bar (Fig AS).
2. Make sure that the oil port is not clogged. Oil
the nose sprocket at the tip of the guide bar (19)
(Fig AT).
3. Check for fuel and oil leakage and loose
fastenings, especially those securing the
handles and the guide bar (19).
If any defects are found, take the tool to an
authorised Service Agent.
4. A bar cover (31) is supplied with this chainsaw
and should be tted over the chain (20) and
guide bar (19) whenever the chainsaw is not
being used. This includes immediately after use,
transportation and service where possible.
The chain teeth are extremely sharp and could
create a safety hazard if the bar cover (31) is not
tted. Furthermore, the bar cover (31) provides
protection to the chain cutting edge when the
saw is not in use (Fig AU).
AS.
AR.
AQ.
AT.
Maintenance
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferrex FCS4800A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferrex FCS4800A in the language / languages: English as an attachment in your email.

The manual is 8,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info