724612
10
Zoom out
Zoom in
Previous page
1/42
Next page
8
Make a wedge-shaped cut before felling the tree, then the felling cut
leaving a hinge for the felling direction.
Beware of any falling branches after felling operations.
Beware of wood splinters when cutting chopped wood.
Ensure your chainsaw is suitable for the job.
Never work above shoulder level or reach out to cut a branch: ensure you
have stable footing at all times.
Do not operate in a hazardous location. Such areas include where there
is a risk of explosion of petrol fumes, leaking gas or explosive dust.
Do not operate in a conned area. Exhaust gases, smoke or fumes could
reach dangerous concentrations.
Protect your tool. This chainsaw is NOT WEATHERPROOF and should not
be left stored for periods of time where it is exposed to direct sunlight,
high ambient temperature and damp, wet or high humidity conditions.
Take care not to spill fuel. When refuelling the chainsaw ensure that the
motor has been switched o. Prevent the spilling of fuel as this may also
ignite with the hot motor. Never refuel whilst the engine is running.
Be careful where you store the chainsaw. Store the tool in a dry area away
from ammable liquids.
Ensure you keep a safe distance from bystanders. The chainsaw emits
exhaust fumes.
Operating instructions and instructions for common cutting tasks,
including the use of personal protection equipment, the need for
adequate training and the risks involved when operating the unit should
not be undertaken while tired, ill or under the inuence of alcohol or
other drugs.
NOTE: Tree felling should not be attempted by un-trained operators.
Ensure you are familiar with the instructions in the manual before
undertaking this task.
Ensure you use a good quality 4 stroke oil. Do NOT mix oil and fuel.
We recommend SAE 15W/50 4 stroke oil.
Never ll fuel tank indoors. Never ll fuel tank when engine is running or
hot. Do not smoke when lling fuel tank.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferrex FCS4800A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferrex FCS4800A in the language / languages: English as an attachment in your email.

The manual is 8,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info