Manual Ferrex FAR 20-LA (page 22 of 30) (English)

734921

Zoom out

Zoom in

1/30

Use

Using the grass trimmer as an edger

WARNING!

Risk of injury!

Improper use of the grass trimmer may result in injury.

− Always ensure that the motor housing and handle are firmly

locked in one of the two available positions and that the

locking mechanism is secure.

− Never use the grass trimmer if the motor housing or the handle

are in an “intermediate position” and not locked into place.

You can use the grass trimmer to cut the edges of grass and beds.

To do so, proceed as follows:

1. Ensure that the grass trimmer is switched off and remove the battery (see chapter

“Inserting and removing the battery”).

2. Pull the locking mechanism

for the motor housing

upwards (see Fig. M).

3. Turn the handle

or motor housing respectively as far as it will go to 90°

(indicated by the arrows on the locking mechanism).

4. Allow the locking mechanism to re-engage and check that it sits firmly.

5. If necessary, set the inclination angle (see chapter “Setting the inclination angle”).

You have converted the grass trimmer into an edge trimmer and can now perform

lawn edge cutting.

After use

1. Release the On/Off switch

to switch off the grass trimmer.

2. Press the battery release button on the battery and remove the battery from the

battery compartment

3. Wait until the cutting unit has come to a stop and let the grass trimmer cool off

completely.

4. Carefully remove any grass and foreign bodies from the cutting apparatus and

grass trimmer.

5. Clean the grass trimmer as described in the chapter “Cleaning and maintenance”.

6. Check the grass trimmer for any damage and wear.

7. Charge the battery as necessary (see chapter “Charging the battery”).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ferrex FAR 20-LA in the language / languages: English as an attachment in your email.

The manual is 4,92 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ferrex FAR 20-LA

Ferrex FAR 20-LA User Manual - German - 31 pages

Ferrex FAR 20-LA User Manual - French, Italian - 88 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ferrex FAR 20-LA Manual

Product: