685663

Ferrex FAR 20-I - 5420132 Manual

19
Zoom out
Zoom in
Previous page
1/29
Next page
Use
19
button have locked into one of the four positions for the
inclination angle and the motor housing is securely in place.
− Do not use the grass trimmer if the motor housing is not
correctly set to one of the designated positions.
You can adjust the taper angle to four different positions.
Set the taper angle as follows:
1. Press the locking mechanism
12
on the motor housing
11
and keep it pressed
down (see Fig. H).
2. Set the desired inclination angle.
3. Release the locking mechanism, allowing the motor housing to snap back into
place.
4. Turn the motor housing a little further to check that the locking mechanism has
clicked into place.
Using the grass trimmer
WARNING!
Risk of injury and damage!
If grass, stones, hard objects or similar items are blocking the cutting
apparatus, injury or damage to the grass trimmer may result.
− If grass, stones, hard objects or similar items must be removed
from the cutting apparatus, immediately switch off the grass
trimmer and remove the battery.
− Wait until the cutting unit has come to a complete stop, then
carefully remove the debris.
− Wear protective gloves for this.
Approach the grass with the grass trimmer only once the grass trimmer
has been switched on.
1. Insert the battery into the grass trimmer as described in the chapter “Inserting and
removing the battery”.
2. Switch on the grass trimmer by depressing the switch lock
2
into the handle
while at the same time pressing the On/Off switch
3
(see Fig. A).
Hold down the On/Off switch.
3. Approach the grass with the grass trimmer.
… 19 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferrex FAR 20-I - 5420132 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferrex FAR 20-I - 5420132 in the language / languages: English as an attachment in your email.

The manual is 2,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ferrex FAR 20-I - 5420132

Ferrex FAR 20-I - 5420132 User Manual - German - 31 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info