685663
16
Zoom out
Zoom in
Previous page
1/29
Next page
Before first use
16
5. Secure the protective cover by passing the two previously removed screws
through the corresponding holes in the protective cover, and screwing them back
in, in a clockwise direction.
6. Check that the protective cover is securely fastened.
7. Attach the nylon blade mount to the motor housing using the fixing screw that
was previously removed.
8. Insert a nylon blade
15
with the larger opening over the head of a locating
bolt
19
(see Fig. N).
9. Twist the nylon blade onto the locating bolt until the nose on the blunt end of the
nylon blade engages with the corresponding groove on the nylon blade mount.
10. Carefully pull on the nylon blade so that the locating bolt snaps into the small
opening of the nylon blade.
11. Turn the nylon blade on the locating bolt in both directions, to check its correct fit:
The nose of the nylon blade must run through the designated guide groove of the
nylon blade mount.
12. To attach the second nylon blade, repeat steps 8-11.
13. Insert the plant guard / cutting width indicator
16
into the designated holes on
the motor housing (see Fig. C).
Cutting width indicator / plant guard
The guard
16
located on the front of the grass trimmer serves both as a plant guard
and as a cutting width indicator. The cutting blade only moves within the length of
the folded-down guard. Users have the option, however, of using the grass trimmer
with the guard folded up.
Assembling the additional handle
1. Insert the additional handle
5
into the bracket
18
.
The toothing of the bracket and the additional handle must interlock with one
another (see Fig. D).
2. Insert the tensioning screw
7
through the hole in the bracket and the additional
handle and tighten it.
3. Tighten the tensioning screw.
4. Check that the additional handle is tightened properly.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferrex FAR 20-I - 5420132 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferrex FAR 20-I - 5420132 in the language / languages: English as an attachment in your email.

The manual is 2,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ferrex FAR 20-I - 5420132

Ferrex FAR 20-I - 5420132 User Manual - German - 31 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info