734919
15
Zoom out
Zoom in
Previous page
1/30
Next page
Preparation
15
Attaching the sliding shoe
1. Push the product and both retaining collars into the two recesses on the
sliding shoe
8
(see Fig. I).
2. Push the product downwards until the sliding shoe’s rear retaining collars click
into place.
3. To remove the sliding shoe from the saw shoe, separate the retaining collars at
the rear end of the sliding shoe and pull it downwards.
Inserting/changing the saw blade
CAUTION!
Risk of injury!
Improperly handling the product and saw blades may result in severe injury.
Only change the saw blades when the saw has come to a stop and the
rechargeable battery has been removed.
Only touch the saw blade with protective gloves.
Only use saw blades with a T-shaft, see the saw blade provided, and pay
attention to the saw blade thickness that must be complied with. Other
saw blades could come out of the saw blade holder during operation.
Pay attention to the material which is being machined when selecting the
saw blade. The saw blade length must be at least equal to the material
thickness plus 20 mm.
This product has a quick-change system so that you can insert or change the saw
blade without using other tools.
1. Set the pendulum stroke adjustment
9
to the 0 position (see Fig.G).
2. Open the protective cover
13
upwards.
3. Turn the saw blade holder
11
in the arrow’s direction (see Fig. G) and insert the
saw blade into the saw blade holder as far as it will go.
The teeth of the saw blade should be facing forward.
4. Let the saw blade holder slide back in position.
Make sure that the saw blade is firmly secured in the saw blade holder.
5. Close the protective cover downwards once again.
Make sure that the saw blade is firmly secured in the guide roller
10
.
The saw blade is removed in reverse order. Hold the saw blade firmly so that spring
pressure does not cause it to jump out.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferrex FAPS 20-I at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferrex FAPS 20-I in the language / languages: English as an attachment in your email.

The manual is 1,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ferrex FAPS 20-I

Ferrex FAPS 20-I User Manual - German - 32 pages

Ferrex FAPS 20-I User Manual - French, Italian - 88 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info