711026

Ferrex FAM 20-i - 5420034 Manual

14
Zoom out
Zoom in
Previous page
1/31
Next page
Safety
14
− Grip the multifunction tool with two hands and maintain a stable posture
to avoid the risk of serious injury. When working with the multifunction
tool, always hold it firmly with both hands and provide for a secure stance.
− Only scrape materials that have not been moistened (e.g. wallpaper) and
do not scrape on a wet base.
− Adopt a stance that prevents injury in the event of slipping off the
workpiece.
− Only use fitted tools that are in proper technical condition.
− Fitted tools may become extremely hot. After making a cut, do not touch
the fitted tool and make sure that the multifunction tool is kept in a safe
place once you have finished work.
− When working on masonry or ceilings, take note of the location of electric
pipes as well as water and sewage pipes.
Safety instructions for sanding paint
− Do not sand paints that contain lead. Determine whether the paint you
intend to sand contains lead before beginning work. Dust from paints
containing lead may cause lead poisoning.
− A special test or a commercial painting contractor can determine whether
a paint contains lead. If in doubt, you should wear a special dust mask
to protect you from fine particles containing lead. Consult a specialist for
information on suitable dust masks.
− Sanding coats of paint containing lead, various types of wood and metals
could produce hazardous or poisonous dust. Coming into contact or
inhaling the dust may pose a risk to the operator or nearby persons. Wear
suitable protective equipment to protect yourself and nearby persons
from coming into contact or inhaling this dust.
Normal dust masks do not provide proper protection.
− Do not allow children or pregnant persons to enter the room or work area
where you are sanding.
− Do not eat, drink or smoke while working. Clean your hands before you
eat, drink or smoke. Do not leave any food or beverages exposed as there
is a risk of dust accumulating in them.
− After sanding, thoroughly clean the surfaces of the work area.
… 14 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferrex FAM 20-i - 5420034 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferrex FAM 20-i - 5420034 in the language / languages: English as an attachment in your email.

The manual is 0,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info