779800
15
Zoom out
Zoom in
Previous page
1/42
Next page
13
Unpacking/Intended use
III. Unpacking
Open the packaging and remove the device carefully.
Remove the packaging material as well as the packaging and transport bracing (if availa-
ble).
Check that the delivery is complete.
Check the device and accessory parts for transport damage.
If possible, store the packaging until the warranty period has expired.
m ATTENTION! The device and packaging materials are not toys!
Children must not be allowed to play with plastic bags, film and small parts!
There is a risk of swallowing and suffocation!
IV. Intended use
The table saw is designed for the slitting and cross-cutting (only with the cross stop) of all types
of timber; plastics, non-ferrous metals, with the exception of magnesium and alloys containing
magnesium. The equipment is not to be used for cutting any type of round wood.
The equipment is allowed to be used only for its prescribed purpose. Any other use is deemed
to be a case of misuse. The user/operator and not the manufacturer will be liable for any dam-
age or injuries of any kind resulting from such misuse.
The machine is to be operated only with suitable saw blades (HM or CV saw blades). The use of
any type of HSS saw blades and cutting discs is prohibited.
An element of the intended use is also the observance of the safety instructions, as well as the
assembly instructions and operating information in the operating manual.
Persons who operate and maintain the machine must be familiar with the manual and must be
informed about potential dangers.
In addition, the applicable accident prevention regulations must be strictly observed.
Other general occupational health and safety-related rules and regulations must be observed.
m IMPORTANT
When using the equipment, a few safety precautions must be observed to avoid injuries and
damage. Please read the complete operating instructions and safety regulations with due
care. Keep this manual in a safe place, so that the information is available at all times. If you
give the equipment to any other person, hand over these operating instructions and safety
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferrex DX254TS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferrex DX254TS in the language / languages: English as an attachment in your email.

The manual is 4.35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info