724603
39
Zoom out
Zoom in
Previous page
1/42
Next page
AFTER SALES SUPPORT
(toll free)
4 Stroke Petrol Lawn Mower
e-mail: help@powertoolsupport.com1800 909 909
MODEL: №. DM46P-DO160 • 09/2018 • 60751
37
1300 889 028
info.aldi@positecgroup.com
10/2019 10852
Troubleshooting
Troubleshooting
Problem
Possible Cause Solution
Engine does
not start.
Fuel tank (14) is empty.
Oil tank is empty.
Spark plug (24).
Blade hitting the grass to be cut.
Old fuel in tank or bowl.
Variable speed throttle control
(2) not turned on.
Check the fuel tank (14), and refuel if
required.
Check the level of the oil dipstick (17),
and if low or empty, add oil.
Clean or replace if dirty or worn.
Increase the cutting height of the mower
so the blades do not make contact with
the grass on start up.
FULLY drain the fuel from the fuel tank (14)
via the drain in the bowl of the carburettor.
Even if there is no fuel in the fuel tank (14),
drain all old fuel out of the bowl.
Refer page 21.
Check the variable speed throttle control
(2) is fully pressed downwards to the
engine.
Cutting / Engine
performance
decreases.
Cutting height.
Bar blade (26) is dull or blunt.
Hard catcher (7) is full .
Increase the cutting height using the
height adjustment lever (28).
Replace the bar blade (26) with new / sharp
blade.
NOTE: Always ensure the engine is turned
o before undertaking this task.
Empty hard catcher (7).
Hard catcher is
not lling up to opti-
mum level.
Cutting height too low.
Grass is wet.
Bar blade (26) is dull or blunt.
Increase the cutting height using the
8 height adjustment lever (28).
Allow the grass to dry before mowing.
Sharpen or replace bar blade (26).
Engine will not stop.
(DO NOT Panic)
Variable speed throttle control
(2) not turned off.
Fully turn the variable speed throttle
control (2) upwards to the upper handle
bar (1).Pump the priming bulb (22) 5 or 6
times quickly.
Remove spark plug cover.
Allow motor to continue to run until fuel
all used. Do NOT leave the mower
unattended.
For all other issues, please contact Customer Service on 1300 889 028
or email info.aldi@positecgroup.com
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferrex DM46P-DO160 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferrex DM46P-DO160 in the language / languages: English as an attachment in your email.

The manual is 6,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info