724603
34
Zoom out
Zoom in
Previous page
1/42
Next page
4 Stroke Petrol Lawn Mower
AFTER SALES SUPPORT
e-mail: help@powertoolsupport.com
1800 909 909
MODEL: №. DM46P-DO160 • 09/2018 • 60751
(toll free)
32
info.aldi@positecgroup.com
1300 889 028
10/2019 10852
Maintenance
Spark Plug Maintenance
To ensure the engine is operating correctly, the spark plug must be properly
gapped and free of carbon deposits. Always check the spark plug cable is rmly
tted to the top of the spark plug.
CAUTION: If the engine has been running, the muer will be very hot.
Be careful not to touch the muer.
WARNING: Ensure the motor is switched o before undertaking
this task.
1. Remove the spark plug cover, then remove the spark plug using the supplied
spark plug spanner (18) in an anti-clockwise direction, and clean any
deposits.
2. Visually inspect the spark plug (24). Discard the spark plug if there is apparent
wear, or if the insulator is cracked or chipped.
3. Check that the end of the spark plug (24) is not blackened by carbon build
up. Clean with a soft wire brush if necessary.
4. Measure the plug gap with a feeler gauge. Correct as necessary by bending
the side electrode. The gap should be 0.7 - 0.8mm.
5. Thread the spark plug (24) in by hand to prevent cross-threading.
6. Once the spark plug (24) is seated, tighten with the supplied spark plug
spanner (18) to compress the washer.
NOTE: When installing a new spark plug, tighten 1/2 turn after the spark plug
(24) seats to compress the washer.
NOTE: When reinstalling a used spark plug, tighten 1/8-1/4 turn after the spark
plug (24) seats to compress the washer.
CAUTION. The spark plug (24) must be securely tightened. An improperly
tightened spark plug (24) can become very hot and may damage the engine.
The spark plug (24) should be changed after approximately 25 hours of use,
or annually. Replacement spark plugs are available from purchase from lawn
mower or small engine repair shops, or online purchase is available from our
website https://help.tools/
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferrex DM46P-DO160 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferrex DM46P-DO160 in the language / languages: English as an attachment in your email.

The manual is 6,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info