779787
25
Zoom out
Zoom in
Previous page
1/31
Next page
Screwing
1. Insert a bit (see chapter Insert tools).
2. Insert the battery
3
(see chapter Insert battery).
3. Set the function selector ring
9
appropriately (see chapter "Function
Selection").
4. Set the torque adjustment ring
8
appropriately.
Start with low torque and increase as needed.
5. Set the rotational direction with the direction switch
11
.
6. Put the bit straight into the slot or slots of the screw.
7. Press the power switch
13
lightly to start the device
1
.
8. Press the power switch harder if necessary.
9. To stop screwing, release the power switch.
10.After you finished working let the device and tools cool off completely.
11. Remove the battery (see chapter Remove battery).
12.Remove the bit (see chapter Remove tools).
Resolve Jam
In the event of a jam, do the following:
1. If the drill is jammed, release the power switch
14
and pull the drill out of the
drill hole.
2. Check whether the device is working by briefly pressing the power switch.
If the device does not start, find the problem (see troubleshooting).
If the device works properly, follow the further steps in this chapter.
3. Check if the jam originates from an unexpected rigid object.
If the jam does not originate from an object, follow the steps in this chapter.
4. When screwing, set the torque adjustment ring
9
to a higher torque.
5. Press the power switch
14
all the way down and apply a little pressure to the
device.
Cleaning
1. Switch off the device
1
remove the battery
3
from the battery holder
16
.
2. Let the device and the accessory tool cool down completely.
3. Clean the housing with a soft, slightly damp cloth.
4. Clean the connection contacts of the battery holder with a dry, clean cloth.
5. Dry the device thoroughly and leave it to dry completely for a while.
Operation
25
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferrex DF-1603 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferrex DF-1603 in the language / languages: English as an attachment in your email.

The manual is 1.13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info