724611
24
Zoom out
Zoom in
Previous page
1/32
Next page
80V Lithium-Ion 20” Brushless Lawn Mower
AFTER SALES SUPPORT
e-mail: info.aldi@positecgroup.com
1300 889 028
MODEL: №. 10094 • 08/2019 • CLM80XA
(toll free)
22
Mulch and mowing
Using the mower without the grass collection bag (16) attached, the lawn
mower will mulch as it cuts and the ne grass clippings are distributed back
onto the grass surface without leaving piles of grass clippings.
To undertake this task, remove the grass collection bag (16), and insert the
mulching block (21) into position.
Ensure the side ejector cover (12) is in the closed position. Do not use the
side discharge chute (22) when mulch and mowing.
Maintenance
WARNING: Switch o the mower, remove the battery pack, ensure
the blade has come to a standstill, and the engine is cooled
before carrying out any adjustment, servicing or maintenance.
Regular maintenance is most important for the best performance and safe
operation. Failure to periodically maintain the condition of your lawn mower
which results in malfunction of the lawn mower will void warranty.
Before each use:
- Check the battery power;
- Check general condition of the mower;
- Check the blade for sharpness;
- Remove grass clipping and dirt from under the housing.
Replacing the blade (23)
WARNING:The blade (23) is sharp. Contacting the blade (23) can
result in serious personal injury. Wear heavy gloves when
servicing the blade (23).
1) Remove the battery pack (9) and the safety key
(20), ensure blades have come to a standstill, and the
engine is cooled.
2) Tilt the mower to the side to access the blade (23)
under the deck. (See Fig. K)
3) Remove the blade bolt (24) using a 27mm wrench
(not supplied) in an anticlockwise direction and take
o the blade (23).
4) Position the new blade (23) with its holes aligned
with the pins. Using a 27mm wrench (not supplied)
K.
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferrex CLM80XA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferrex CLM80XA in the language / languages: English as an attachment in your email.

The manual is 3,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info