724611
8
Zoom out
Zoom in
Previous page
1/32
Next page
MODEL No.: CLM80XA, PRODUCT No.: 10094
6
operator. Always ensure that both hands are in the operating position
before returning the lawnmower to the ground.
m) Do not put hands or feet near or under rotating parts. Keep clear of the
discharge opening at all times.
n) Not to touch the blades before the disabling device has been removed
and the blades have come to a complete stop.
o) Do not start the lawnmower when standing in front of the discharge
opening.
p) Do not transport the lawnmower while the power source is running.
Never pick up or carry the lawnmower while the motor is running.
q) To remove the disabling device
whenever leaving the machine unattended;
before clearing a blockage;
before checking, cleaning or working on the machine;
after striking a foreign object, Inspect the machine for damage and
make repairs before restarting and operating the lawnmower.
If the lawnmower starts to vibrate abnormally (check immediately)
- inspect for damage;
- replace or repair any damaged parts;
- check and tighten any loose parts.
Maintenance and storage
a) Keep all nuts, bolts and screws tight to be sure the equipment is in safe
working condition;
b) Check the grass catcher frequently for wear or deterioration;
c) Replace worn or damaged parts for safety. Use only genuine replace-
ment parts and accessories.
d) Be careful during adjusting of the lawnmower to prevent entrapment of
the ngers between moving blades and xed parts of the lawnmower.
e) Always allow the lawn mower to cool down before storing.
f) When servicing the blades be aware that, even though the power
source is switched o, the blades can still be moved.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferrex CLM80XA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferrex CLM80XA in the language / languages: English as an attachment in your email.

The manual is 3,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info