642306
8
Zoom out
Zoom in
Previous page
1/9
Next page
Page 21
iLoft VDSiLoft VDS
Answering a call
Hands free mode:
When the call button on the Entry panel is pressed a call tone is
emitted both from the panel and on the monitor, causing the screen
to start up.
Press the
button to speak with the visitor. The audio channel
between the street and the home will be opened; operating in
hands-free mode. The communication will automatically end after
90 seconds, or at any time by pressing the
button.
The led will remain lit (blue) for the duration of the conversation.
If communication is not established with the entry panel, the monitor
will automatically turn off after 30 seconds.
While in simplex conversation mode (press the button to speak
and release to listen).
When the call button on the Entry panel is pressed, a call tone is
emitted both from the panel and on the monitor, causing the screen
to start up. Press the
button to talk to the visitor, leaving the
input audio channel activated. The simplex mode is indicated by the
ashing blue led light.
From this moment on, each time you press the
button, the output
audio channel is activated (constant blue led light) and when releas-
ing it it activates the input audio channel (blue ashing led light) the
operation is in simplex mode. The communication will automatically
end after 90 seconds, or at any time by pressing the
button. Once
disconnected the blue led will turn off.
If communication is not established with the entry panel, the monitor
will automatically switch off after 30 seconds.
Manual Monitor Activation (Auto-Start)
With the monitor on standby, press and hold this button until the
image appears (less tha 2 seconds).
If there is more than one camera in the installation, to view the second
camera’s image you must release the button and re-press it until the
second camera’s image appears.
To activate the audio and speak to the visitor or open the door, follow
the steps above.
If communication is not established with the entry panel, the monitor
will automatically switch off after 30 seconds.
NOTE: If there is more than one iLoft monitor in the system and a call is made to a monitor, the
rest of the monitors will show a blue led warning that the channel is busy.
8


Need help? Post your question in this forum.

Forumrules
1

Forum

fermax-vds-iloft-monitor-with-osd-menu

Reset search

  • I have two local entries with each a monitor from the central entrance.
    Can I put the local push button from the two local entrances on the two monitors over 1 NO contact?
    Julien Nys
    j.nys@skynet.be Submitted on 8-5-2023 at 16:49

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fermax VDS iLOFT MONITOR WITH OSD MENU at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fermax VDS iLOFT MONITOR WITH OSD MENU in the language / languages: English as an attachment in your email.

The manual is 1,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Fermax VDS iLOFT MONITOR WITH OSD MENU

Fermax VDS iLOFT MONITOR WITH OSD MENU User Manual - German - 9 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info