510116
9
Zoom out
Zoom in
Previous page
1/120
Next page
9
EN

Toswitchonthemachine,keepthelock-off
button (2) pressed and simultaneously press
theon/offswitch(1).
Toswitchoffthemachine,releasetheon/off
switch (1).

The machine is equipped with an overload
protection device which automatically switches off
the machine if the machine is overloaded.
● Switchoffthemachine.
● Removethemachinefromtheworkpiece.
● Switchonthemachine.
● Runthemachineatno-loadforapproximately
1 minute to allow the machine to cool down.

The laser is used for projection of the cut on the
wall.
Toswitchonthelaser(8),presstheon/off
switch (7).
Toswitchoffthelaser(8),releasetheon/off
switch (7).

Onlyusethemachinewhenitisconnectedtoa
vacuum device which is approved for stone dust.
The vacuum device must be suitable for the
material to be worked. Use a special vacuum
device when working with toxic materials or
where toxic dust is produced.
2
- Never use a household vacuum cleaner.
The use of a household vacuum cleaner can
easily damage both your health and the
vacuum cleaner.
- Always use the dust extraction adapter.
- Makesurethatthehoseofthevacuumdevice
is securely connected to the dust extraction
adapter.
- Ifthevacuumdevicebreaksdown,stopwork
immediately, switch off the machine, remove
the mains plug from the mains, and try to solve
the problem.
● Insertthedustextractionadapter(26)intothe
dust extraction connection (12).
● Connectthehoseofavacuumdevicetothe
dust extraction adapter (26).

● Drawlinestodenethedirectioninwhichto
guide the cutting discs.
● Holdthemachinewithbothhands.
● Settheslotwidth.
● Takeoneofthefollowingsteps:
- Lowerthemachineintothewallandsetthe
slot depth (recommended). The machine is
placed against the wall and the cutting discs
lower into the wall in order to set the slot
depth more accurately.
- Set the slot depth and lower the machine
into the wall.
● Placethemachinewiththeguiderolleronthe
wall.Makesurethatthecuttingdiscsalign
with the drawn lines on the wall.
● Settheslotdepth.
● Switchonthemachine.
● Waituntilthemachinehasreachedfullspeed.
● Slowlymovethemachinealongthepre-drawn
lines,rmlypressingtheguiderolleragainst
the wall.
● Donotapplytoomuchpressureonthe
machine.Letthemachinedothework.
● Switchoffthemachineandwaitforthe
machine to come to a complete standstill
before putting the machine down.

4
Before cleaning and maintenance,
always switch off the machine and
remove the mains plug from the mains.
● Regularlycleanthehousingwithasoftcloth.
● Keeptheventilationslotsfreefromdustand
dirt.Ifnecessary,useasoft,moistclothto
remove dust and dirt from the ventilation slots.
● Regularlycleanthecuttingdiscstoavoid
inaccuracies during use.

Thelaseruses2AAAbatteries.Ifthelaserstops
working, the batteries must be replaced.
● Removethecover(27)fromthebattery
compartment(9).
● Removetheoldbatteries(28).
● Placethenewbatteries(28).
● Mountthecover(27)tothebattery
compartment(9).

Consulttheenclosedwarrantyterms.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferm WSM1009 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferm WSM1009 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 3,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info