Manual Ferm WSM1008 (page 7 of 128) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish)

510115

Zoom out

Zoom in

1/128

Kickback

Kickback is the upward and backward movement

of the cutting discs when the cutting discs

unexpectedly touch an object. Securely hold the

machine with both hands during use. Keep your

attention focused on the operation.

Kickback is usually caused by:

- unintentionally touching hard objects or

materials with the rotating cutting discs;

- blunt cutting discs;

- cutting discs that are not properly mounted;

- cutting into a previous cut;

- a lack of attention to the operation;

- an instable stance.



● Donotlookdirectlyintothelaserbeam.

● Donotpointthelaserbeamhumansor

animals.

● Donotpointthelaserbeamatstrongly

reectingmaterial.

● Donotinserthardobjectsintothelaseroptics.

● Cleanthelaseropticswithasoft,

dry brush.

● Onlyhavethelaserrepairedbyaqualied

technician.



Always check that the voltage of the

power supply corresponds to the voltage

on the rating plate.

● Donotusethemachineifthemainscableor

the mains plug is damaged.

● Onlyuseextensioncablesthataresuitablefor

the power rating of the machine with a

minimum thickness of 1.5 mm

.Ifyouusea

extension cable reel, always fully unroll the

cable.



Ifthemoulded3-pinplugattachedtotheunitis

damaged and needs replacing, it is important that it

is correctly destroyed and replaced by an

approvedBS1363/13Afusedplugandthatthe

following wiring instructions are followed.

The wires in the mains cable are coloured in

accordance with the following code:

blue neutral

brown live

As the colours of the wires in the mains cable of

the unit may not correspond to the coloured

markings identifying the terminals in the plug,

proceed as follows:

- The wire which is coloured blue must be

connected to the terminal which is marked with

the letter N or coloured black.

- The wire which is coloured brown must be

connected to the terminal which is marked with

theletterLorcolouredred.

TECHNICAL DATA

WSM1008

Mainsvoltage  V~ 230

Mainsfrequency  Hz 50

Powerinput  W 1,600

No-load speed min

-1

 6,000

Slotwidth  mm 8-30

Slotdepth  mm 8-40

Cuttingdisc

 Diameter  mm 150

Bore mm 22.2

Protectionclass  IP20

Weight kg 6.8

NOISE AND VIBRATION

WSM1008

Soundpressure(Lpa)  dB(A) 98.8

Acousticpower(Lwa)  dB(A) 109,8

Uncertainty(K)  dB(A) 3

Vibration(maingrip)  m/s

 3.74

Vibration(auxiliarygrip)  m/s

 3.50

Uncertainty(K)  m/s

1.5

Wear hearing protection.

Vibration level

The vibration emission level stated in this instruction

manual has been measured in accordance with a

standardisedtestgiveninEN60745;itmaybeused

to compare one tool with another and as a

preliminary assessment of exposure to vibration

when using the tool for the applications mentioned

- using the tool for different applications, or with

different or poorly maintainted accessories,

maysignicantlyincreasetheexposurelevel

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ferm WSM1008 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 5,02 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ferm WSM1008 Manual

Product: