Manual Ferm WEM1041 - FWM 10-80 (page 4 of 54) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish)

632782

Zoom out

Zoom in

1/54

Ferm 105

FIN

04 Ferm

Electrical information

Fig. 2

Elements on the front side of the device – see the front side illustration

• Socket with “-“ label

Connection for the earthing cable with an earthing clamp

• Socket with “+“ label

Connection for the electrode cable with an electrode clamp.

• Green LED

The device is ready for operation

• Yellow LED

The device has switched off due to excessive loading or overheating of the internal

semiconductors. Wait about 4 to 5 minutes until the device has cooled down. When the

yellow LED goes out and the green LED illuminates then you can continue welding.

• Switch

Auniversal switch for ON/OFF (0 position), current intensity and electrode diameter.

Switching on/off produces an audible click.

• Rear and sides of the device

Keep the ventilation slots clear of obstructions, and maintain at least 10 cm clearance from

walls and other surfaces.

2. SAFETY REGULATIONS

Explanation of symbols

Defective or discarded electrical or electronic devices must be deposited at

the appropriate recycling stations.

Symbol for welding inverter with rectifier for DC current

EN 60974-1: Electrical safety standard

1998 + A1 + A2

Symbol for hand arc welding

Symbol for output voltage protected against accidental touching

Uo DC output voltage: unloaded (when not welding) 70 V max.

Symbol for mains connection. Mains frequency 50 Hz

U1 Mains voltage 230 V

FIN

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ferm WEM1041 - FWM 10-80 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 2,61 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ferm WEM1041 - FWM 10-80 Manual

Product: