812771
6
Zoom out
Zoom in
Previous page
1/60
Next page
6
EN
Battery type Lithium battery
Weight (bare tool) 65 g
Model No. TSM1037/PGM1013
Voltage 5 V
USB-A output 2.4 A max
Battery type Lithium battery
Weight (bare tool) 175 g
Only use the following batteries of the AX-POWER
20V battery platform. Using any other batteries
could cause serious injury or damage the tool.
CDA1158 20V, 1.5 Ah Lithium-Ion
CDA1154 20V, 2 Ah Lithium-Ion
CDA1155 20V, 4 Ah Lithium-Ion
The following charger can be used to charge
these batteries.
CDA1156 Charger adapter
CDA1157 Quick charger
CDA1171 Quick charger
CDA1175 Quick charger
The batteries of the AX-POWER 20V battery
platform are interchangeable with all the FERM
AX-POWER battery platform tools.
Description
The numbers in the text refer to the diagrams on
pages 2-3.
Fig. A
1. Soldering tip
2. Soldering top holder
3. LED work light
4. Soldering iron handle
5. On/Off button
6. Display
7. “+” Increase button
8. “-” Decrease button
9. Power plug inlet
10. Heating element
11. Soldering iron stand
12. Sponge
13. Power plug
14. Indicator light
15. On/Off button adapter
16. AX Adapter
17. USB-A port
18. AX-POWER 20V Battery
19. Battery unlock button
3. ASSEMBLY
Before any work on the power tool,
remove the battery.
The battery must be charged before
first use.
Inserting the battery into the AX Adapter
Fig. A
Ensure that the exterior of the battery is
clean and dry before connecting to the
charger or machine.
1. Insert the battery (18) into the base of the AX
Adapter (16) as shown in Fig. A.
2. Push the battery further forward until it clicks
into place.
Removing the battery from the AX Adapter
Fig. A
1. Push the battery unlock button (19).
2. Pull the battery out of the machine like shown
in Fig. A.
When the machine is not being used over
a longer period of time it is best to store
the battery in charged condition.
Soldering Iron
Fig. A
The soldering tip has to be mounted
before initial use. See installing /
replacing soldering tip.
Make sure that the soldering iron is not
connected or turned off (15) on the
adapter (the indicator light (14) is not
turned on).
1. Place the soldering iron on the table/flat
surface.
2. Put the Power plug (13) into the Power inlet (9)
of the soldering iron until firmly connected.
3. Turn the AX adapter (16) on by pressing the
On/Off button (15). The indicator light (14) will
light up when switched on.
Make sure the soldering iron is turned off
and cold when replacing the soldering
tip.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferm TSM1037-SGM1026 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferm TSM1037-SGM1026 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 8.68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info