764185
12
Zoom out
Zoom in
Previous page
1/16
Next page
ES
12
con el dispositivo de rotura (K) del cortador de
azulejos.
Por lo tanto, después de hacer la muesca, es
necesario dar golpecitos con un martillo pequeño
hasta que se rompa el azulejo. Eso se hace
dando golpecitos en la parte inferior del azulejo
por todo lo largo de la muesca.
Así la línea de rotura puede seguir trasladándose
por el azulejo, por lo que el azulejo se romperá
por la línea de rotura.
Manera de hacer agujeros con la taladradora.
1. Poner el azulejo con la cara esmaltada hacia
arriba debajo de la taladradora. Apretando
los asideros el uno contra el otro, el azulejo
se puede colocar con precisión debajo de la
taladradora.
2. Moviendo la cuchilla más desde el medio, el
diámetro del agujero se hace mayor. Hay que
tener en cuenta que la gradación de la escala
en el portador de la cuchilla, indica el radio
del agujero. O sea que el diámetro será dos
veces más grande.
3. Girando la manivela hacia la derecha, primero
se taladra un agujero y a continuación se
obtiene un agujero mayor de la medida
exacta.
4. La manivela no debe ser empujada durante el
girar, para evitar que el azulejo se rompa.
5. Mantenimiento
Las varillas guiadoras y la taladradora no •
necesitan ser lubricadas.
Después del uso, el aparato hay que limpiarlo •
dejándolo limpio de polvo y guardarlo en un
sitio seco. Si el aparato no se va a usar por un
tiempo prolongado, se aconseja lubricar
ligeramente con aceite las varillas guiadoras
y la palanca.
Un mantenimiento periódico evita
problemas inútiles!
Manera de cambiar la cuchilla
Si la cuchilla se ha desgastado, se puede cambiar
por un ejemplar nuevo. Se hace de la manera
siguiente.
Destornillar el tornillo con el que viene montada la
cuchilla y sacar la cuchilla del aparato. Cambiar
esa cuchilla por una nueva y volver a atornillar el
tornillo.
Garantia
Os termos e condições da garantia encontram-se
descritos no boletim da garantia fornecido em
separado.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferm TCM1012 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferm TCM1012 in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 2,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info