697793
5
Zoom out
Zoom in
Previous page
1/92
Next page
5
EN
SCROLL SAW
SSM1007
Thank you for buying this Ferm product. By doing
so you now have an excellent product, delivered
by one of Europe’s leading suppliers. All products
delivered to you by Ferm are manu factured
according to the highest standards of performance
and safety. As part of our philosophy we also
provide an excellent customer service, backed
by our comprehensive warranty. We hope you will
enjoy using this product for many years to come.
1. SAFETY INSTRUCTIONS
Explanation of the symbols
Read the operating instructions carefully
before using this device. Familiarise
yourself with its functions and basic
operation. Service the device as per
the instructions to ensure that it always
functions properly. The operating
instructions and the accompanying
documentation must be kept in the
vicinity of the device.
Denotes risk of personal injury, loss of
life or damage to the tool in case of non
observance of the instructions in this
manual.
Denotes risk of electric shock.
Wear ear and eye protection.
Specific safety instructions
Wear safety goggles and a dust mask.
This scroll saw machine is for indoor use only.
Ensure that the teeth of the saw point
downwards prior to using the machine.
If teeth of the saw blade are missing or are
damaged, then the saw blade must be
replaced immediately.
Use the scroll saw machine on a stable and flat
surface.
Never exert pressure on the sides of the saw
blade because it may break.
Check wooden work pieces for possible
protruding nails etc. and remove these.
Do not touch the sawing surface with your hands.
Never leave the sawing machine unattended
while it is running.
Do not remove any wood debris etc, in the
vicinity of the saw with your hands while it is
running. Turn the machine off before removing
the wood debris.
Immediately switch off the machine when
Interruption in the mains plug, mains lead or
mains lead damage.
Defect switch.
Smoke or stench of scorched isolation.
Electrical safety
When using electric machines always observe the
safety regulations applicable in your country to
reduce the risk of fire, electric shock and personal
injury. Read the following safety instructions and
also the enclosed safety instructions.
Always check that the power supply corre-
sponds to the voltage on the rating plate.
Mains connection
Only use earthed sockets with earthing wire
connected per the regulations.
Using extension cables
Only use an approved extension cable, corre-
spon ding to the machine power use. The wires
must have a minimum cross section of 1.5 mm2. If
the cable is on a reel, it must be fully laid out.
2. MACHINE INFORMATION
Intended use
This scroll saw is great for making toys, puzzles,
games, fretwork and jewelry. Because of its
cutting capacity it is a handy do-it-yourself tool.
It cuts wood up to 50 mm thick as well as plastics
and non-ferrous metals.
Technical specifications
Voltage 230 V ~
Frequency 50 Hz
Power input 120 W
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferm SSM1007 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferm SSM1007 in the language / languages: All languages as an attachment in your email.

The manual is 10,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info