800252
5
Zoom out
Zoom in
Previous page
1/60
Next page
5
EN
CORDLESS PRESSURE WASHER 20V
PWM1001
Thank you for buying this FERM product.
By doing so you now have an excellent product,
delivered by one of Europe’sleading suppliers.
All products delivered to you by Ferm are
manufactured according to the highest standards
of performance and safety. As part of our
philosophy we also provide an excellent customer
service, backed by our comprehensive warranty.
We hope you will enjoy using this product for
many years to come.
1. SAFETY INSTRUCTIONS
Read the enclosed safety warnings,
the additional safety warnings and the
instructions. Failure to follow the safety
warnings and the instructions may result
in electric shock, fire and/or serious
injury. Save the safety warnings and
the instructions for future reference.
The following symbols are used in the user
manual or on the product:
Denotes risk of personal injury, loss of life
or damage to the tool in case of non-
observance of the instructions in this
manual.
Indicates electrical shock hazard.
DO NOT direct the water jet
towards people or animals.DO NOT
direct the water jet towards the unit
itself, electrical parts or towards
other electrical.
The machine is not intended to be
connected to the potable water mains.
Protect the appliance against frost.
Do not dispose of the product in
unsuitable containers.
The product is in accordance with the
applicable safety standards in the
European directives.
SAFETY WARNINGS
When using electric machines always observe the
safety regulations applicable in your country to
reduce the risk of fire, electric shock and personal
injury. Read the following safety instructions and
also the enclosed safety instructions.
WARNING!
Read all safety warnings and all
instructions. Failure to follow the
warnings and instructions may result in
electric shock, fire and/or serious injury.
Immediately switch off the machine when:
Defect switch.
Smoke or stench of scorched isolation.
Specific safety rules
The USE and MAINTENANCE manual constitutes
an essential part of the cleaner equipment and
should be kept in asafe place for future reference.
If you sell the cleaner, the manual should be
handed on to the new owner.
Before starting the cleaner, make sure that
it is receiving water correctly. Operating the
cleaner without water could damage the seals.
Protect the cleaner from freezing during the
winter.
Do not obstruct the ventilation grilles during
operation.
Position the cleaner AS NEAR POSSIBLE to the
water supply.
The packaging is easily recyclable, and must be
disposed of in compliance with the regulations
in force in the country of installation.
Use the cleaner only with accessories
and replacement parts authorized by the
manufacturer. The use of original accessories
and replacement parts will ensure safe, trouble
free operation.
Avoid unintentional firing of the trigger. Do not
carry the lance/ trigger assembly with your hand
over the trigger. Always use the trigger lock
mechanism.
Ensure that the safety lock on the trigger is used,
when you have stopped using the pressure
washer to prevent accidental operation.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferm PWM1001 - AX-Power at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferm PWM1001 - AX-Power in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 4.71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info