763838
7
Zoom out
Zoom in
Previous page
1/88
Next page
7
EN
Removing
Open the sanding paper clamps (4).
Remove the sanding paper (7) from the
sanding pad (3).
Close the sanding paper clamps (4).
USE

To switch on the machine, press the on/off
switch (1).
To switch the machine to continuous mode,
keep the on/off switch (1) pressed and
simultaneously press the lock-on button (2).
To switch off continuous mode, press the on/off
switch (1) again.
To switch off the machine, release the on/off
switch (1).

Insert the dust extraction adapter (9) into the
dust extraction connection (7).
Connect the hose of a vacuum cleaner to the
dust extraction adapter (9).
Hints for optimum use
Clamp the workpiece.
Firmly hold the machine with both hands.
Switch on the machine.
Place the sanding pad with sanding paper on
the workpiece.
Slowly move the machine over the workpiece,
rmly pressing the sanding pad against the
workpiece.
Do not apply too much pressure on the machine.
Let the machine do the work.
Switch off the machine and wait for the machine
to come to a complete standstill before putting
the machine down.
CLEANING AND MAINTENANCE
4 Before cleaning and maintenance,
always switch off the machine and
remove the mains plug from the mains.
Regularly clean the housing with a soft cloth.
Keep the ventilation slots free from dust and
dirt. If necessary, use a soft, moist cloth to
remove dust and dirt from the ventilation slots.
Regularly clean the sanding pad to avoid
inaccuracies during use.

To remove the old sanding paper (8),
proceed as described in the section
„Mounting and removing the sanding paper“.
To mount the new sanding paper (8),
proceed as described in the section
„Mounting and removing the sanding paper“.

In case of wear, the sanding pad must be replaced.
If necessary, remove the sanding paper.
Loosen the screws (10) from the sanding pad
(3).
Remove the old sanding pad (3).
Mount the new sanding pad (3).
Tighten the screws (10) to the sanding pad (3).
WARRANTY
Consult the enclosed warranty terms.
ENVIRONMENT
Disposal
8
The product, the accessories, and the packaging
must be sorted for environmentally friendly
recycling.
Only for EC countries
Do not dispose of power tools into domestic waste.
According to the European Guideline 2002/96/EC
for Waste Electrical and Electronic Equipment
and its implementation into national right, power
tools that are no longer usable must be collected
separately and disposed of in an environmentally
friendly way.
The product and the user manual are subject to
change. Specifications can be changed without
further notice.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferm PSM1025 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferm PSM1025 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 12,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info