Manual Ferm PPM1015P (page 7 of 36) (English, Dutch, French, Turkish)

764213

Zoom out

Zoom in

1/36

Warning!

• When installing and removing the plane blade,

care has to be taken that all parts (plane

blade, drum cover and screws) are clean.

Dirt or possible existing layers of dirt have to

be removed. Check regularly if the clamping

screws are tightened firmly.

Replacing the drive belt

Fig. 5

• Loosen screw (10) and take off the belt cover

(11).

• Remove worn drive belt (12).

• Before assembling a new drive belt, clean both

belt pulleys.

• Place the new drive belt on the small pulley

first and then work it on the large pulley by

hand while rotating.

• Reattach the belt cover (11) and tighten with

the screw (10).

Troubleshooting

1. The operating switch is switched on, but

the motor is not working.

• The electric circuit is broken.

• Have the electric circuit repaired.

• Wires in the mains plug or in the socket are

loose.

• Have socket and plug checked or repaired.

• The switch is faulty.

• Have the switch replaced.

2. The operating switch is switched on, but

unusual noises can be heard, the motor is

not working or only very slowly.

• Component jammed.

• Have the electric tool checked or repaired.

• Too much thrust, as a result the motor is

dragging.

• Use less thrust during the task.

3. Motor gets hot.

• Foreign substances have got inside the motor.

• Have the foreign substances removed.

• Pressure too high.

• Use less thrust during the task

• Planing tool blunt.

• Replace or sharpen the planing blade.

4. The motor is working, but the planing tool

is not moving.

• V-belt worn.

• Have V-belt replaced.

5. Frequent or strong sparks on the

commutator.

• Short circuit on the armature.

• Have the armature replaced.

• Carbon brushes worn out or jammed

• Have the carbon brushes checked.

• Rough running of the commutator.

• Have the surface of the commutator

cleaned or ground

For your own safety, never remove parts or

accessories of the electric tool during operation.

In case of fault or damage have the electric tool

repaired only by a specialist workshop or by the

manufacturer.

Use only original spare parts and original

plane blades!

Maintenance

Make sure that the plug is removed from

the mains when carrying out

maintenance work on the motor.

The machines have been designed to operate

over a long period of time with a minimum of

maintenance. Continuous satisfactory operation

depends upon proper machine care and regular

cleaning.

Cleaning

Regularly clean the machine housing with a

soft cloth, preferably after each use. Keep the

ventilation slots free from dust and dirt. If the dirt

does not come off use a soft cloth moistened with

soapy water. Never use solvents such as petrol,

alcohol, ammonia water, etc. These solvents may

damage the plastic parts.

Lubrication

The machine requires no additional lubrication.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ferm PPM1015P in the language / languages: English, Dutch, French, Turkish as an attachment in your email.

The manual is 4,16 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ferm PPM1015P Manual

Product: