Manual Ferm PMM1006 (page 4 of 92) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish)

510103

Zoom out

Zoom in

1/92

4 Ferm

Wear eye protection



• The tool should not be operated in damp, wet

premises; during a rain, fog and snow in the

open, and in environment with a risk of

explosion.

• The switch should be in “OFF” position before

putting the plug in the mains socket.

• For long hair, wear hair protection. Work only

with closely fitting clothes.

• Secure the vessel with the mixed substance

against moving on the floor.

• Always direct backwards the flexible lead from

the tool. The flexible lead should not be

exerted by tensile stress and should not lie on

or pass over sharp edges.

• Use the supplementary handle.

• Consider possible reaction torque.

• Wear ear and eye protection.



• Excessive sparking of the carbon brushes and

verticiliosis in the collector.

• Interruption of the mains plug, mains lead or

mains lead damage.

• Defect switch

• Smoke or stench of scorched isolation



When using electric machines always observe the

safety regulations applicable in your country to

reduce the risk of fire, electric shock and personal

injury. Read the following safety instructions and

also the enclosed safety instructions.

Always check that the power supply

corresponds to the voltage on the rating

plate.

Class ll machine. Your machine is double

insulated; therefore no earthwire is

required.

Replacing cables or plugs

Immediately throw away old cables or plugs

when they have been replaced by new ones. It is

dangerous to insert the plug of a loose cable in the

wall outlet.

Using extension cables

Only use an approved extension cable suitable

for the power input of the machine. The minimum

conductor size is 1,5 mm

. When using a cable

reel always unwind the reel completely.



Placing a whisk

Remove the plug from the mains before

placing a whisk.

Use only whisks conform the specified diameter.

• Screw the whisk with tread (M14) as far as

possible in the tool

• Tighten the whisk properly with an open-end

wrench

4. Use

Improper use may damage the instrument.

Observe therefore these instructions:

• Use a tool up to the specified diameter.

• Load the tool in such a way that the speed

would not drop considerably or that it would

stop.

Check if the data on the rating plate correspond

with the actual mains vol tage.

Instrument scheduled for 230 V can be plugged to

220 V/240 V mains.

The ON/OFF switch

• To switch on the tool, press and hold the on/off

switch (1).

• If you release the on/off switch, the tool will be

switched off.

Switch locking mechanism

You can lock the on/off switch by pressing the

on/off switch (1) and then button (2). The switch

lock can be released by briefly pressing the on/off

switch.



Starting current limiting

The electronically controlled smooth start takes

care that the machine starts without jerk. In this

manner, the splashing of thin liquid materials is

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ferm PMM1006 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 2,2 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ferm PMM1006 Manual

Product: