Manual Ferm PGM1010 (page 6 of 36) (English, German, Dutch, French, Spanish)

632699

Zoom out

Zoom in

1/36

Ferm6

2l 40ml

3l 60ml

4l 80ml

For general use you can use 2-stroke oil.



• Usepetrolmixtureonly

• Removeanypowercords

• Turnpowerswitchesoff

• Donotoverfill–leaveairgapattopoffuel

level

• Alwaysscrewdownfuelcap

• Cleanupanyspilledfuel

• Donotsmokewhileoperatingthegenerator

Always use caution!



Fig. 1 + 3 + 4

1. Turn on fuel tap (8).

2. Turn on engine switch (5).

3. Move choke lever (6) to closed position

(to restart a warm engine, leave the choke

lever in open or half-open position).

4. Pull slowly on the starter cord until it

engages, then pull sharply to start the

engine (7).

5. Allow the engine to run until it warms up,

and then move the choke lever to the open

position (6).



• Startthegenerator.

• Plugintheelectricalapplianceplug.



Fig. 1 + 4

1. Unplug all cords (5)

2. Turn engine switch to “OFF” (5)

3. Turn off fuel tap (8)

4. Service & maintenance

Periodic maintenance

Daily (pre-operation check)

• Checkfuelhoseforcracksorother

damage. Replace if necessary.

• Checkexhaust-systemforleakage.

Retighten or replace gasket if necessary.

• Checkchokeoperation.

• Checkrecoilstarteroperation.



• Checkconditionofsparkplug.Adjustgap

and clean. Replace if necessary.



• Cleanfueltapandfueltankfilter.Replaceif

necessary.

• Checkfittingsandfasteners.Replaceif

necessary.



• Contactaspecializedservicecentreto

check the valve clearance.

• Checkthefanofthecoolingsystemfor

damage.

Spark plug inspection

Fig. 2

• Disconnectthesparkplugcap,andremove

any dirt from around the spark plug area.

• Removesparkplug(10)withtheplug

spanner supplied.

• Inspectthesparkplug.Itshouldbeatan

colour.

• Measurethegap(distancecontactpoint)

with a suitable gauge. The gap should be

0,7 - 0,8 mm. Correct the gap, if necessary,

by carefully bending the side electrode.

• Replacethesparkplugiftheelectrodes

are worn, or if the insulator is cracked or

chipped.

• Installthesparkplugcarefully,byhand,to

avoid cross-threading.

• Placethesparkplugwithcorrecttorque:20

Nm.

• Attachthesparkplugcap.



• Waitforexhausttocool.

• Exhaustscreenmaybeblockedupwith

carbon deposits.

• Undothescrewcapandremovethe

exhaust screen.

• Cleanthescreenwithawirebrushandrefit.

• Replaceexhaustscreenifdamaged.

Air filter cleaning

• Removetheairfiltercover(9).

• Removefilterelementandwashwellin

solvent.

• Pourasmallamountofoilontothefilter

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ferm PGM1010 in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 3,53 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ferm PGM1010 Manual

Product: