Manual Ferm PGM1009 (page 7 of 36) (English, German, Dutch, French, Spanish)

510123

Zoom out

Zoom in

1/36

Ferm 7

element and gently squeeze out any excess

oil.

• Replacethefilterelementandairfilter

cover.

• Besurethefiltercoversealsproperlyall

around.

Do not run the engine without the air

filter element in place.

Never place a wet filter (with solvent)

on the machine.

Fuel tap

• Toremovethefueltapfilter,simplyundo

the cup at the bottom of the fuel tank.

• Useasmallspannertoremovethetap.

• Cleanandwashoutthefilterandcup,and

replace.





• Makesureyouhaveplentyoffuel

• Makesurethefueltapison

• Makesuretheengine-switchison

• Removesparkplug,connectsparkplug

lead and earth it to the generator. Pull

starter cord gently and look for a spark. If

there is no spark, replace spark plug.

Spark plug is OK, but engine still won’t start

• Checkfueltapfilterisclean

• Checkfuellineisclear

• Checkcarburetorisnotclogged

Engine will not start

• Cleanorreplacesparkplug

• Checkignitionsystem–iffaulty,contact

your service centre

• Checkcompression–iflow,contactyour

service centre

• Checkforloosecylinderhead–tighten

bolts

• Checkfordamagedcylinderheadgasket–

replace if necessary

Cleaning

Clean the housing regularly with a soft cloth,

preferably every time it is used. Keep the air

vents free of dust and dirt.

Remove stubborn dirt with a soft rag moistened

in soapy water. Do not use any solvents such

as petrol, alcohol, ammonia, etc. as such

substances can damage the plastic parts.

Storage (long term)

• Drainfueltank,fueltap,carburetorbowl

and carburetor

• Pour1cupofengineoilintothefueltank

and shake the generator to spread the oil

around the tank. Drain excess oil.

• Removesparkplugandpourin1spoonful

of engine oil, pull the starter cord several

times with the starter switch OFF. Replace

spark plug.

• Pullonthestartercorduntilyoufeel

compression and stop.

• Cleanthegeneratorsexteriorandcoatwith

rust inhibitor.

• Placethegeneratoronflatgroundand

cover with a clean dry cloth.

Faults

Should a fault occur, e.g. after wear of a part,

please contact the service address on the

warranty card. In the back of this manual you

find an exploded view showing the parts that

can be ordered.

Environment

To prevent damage during transport, the

appliance is delivered in a solid packaging

which consists largely of reusable material.

Therefore please make use of options for

recycling the packaging.

Faulty and/or discarded electrical or

electronic apparatus have to be

collected at the appropriate recycling

locations.

Warranty

Read the terms of warranty on the separate

warranty card which is enclosed.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ferm PGM1009 in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 4,43 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ferm PGM1009 Manual

Product: