Manual Ferm MSM1040 (page 6 of 160) (English, German, Dutch, French, Italian, Turkish, Spanish)

762257

Zoom out

Zoom in

1/160

RADIAL MITRE SAW

MSM1040

Thank you for buying this Ferm product.

By doing so you now have an excellent product,

delivered by one of Europe’s leading suppliers.

All products delivered to you by Ferm are

manufactured according to the highest standards

of performance and safety. As part of our

philosophy we also provide an excellent customer

service, backed by our comprehensive warranty.

We hope you will enjoy using this product for

many years to come.

1. SAFETY INSTRUCTIONS

Read the enclosed safety warnings,

the additional safety warnings and the

instructions. Failure to follow the safety

warnings and the instructions may result in

electric shock, fire and/or serious injury. Save the

safety warnings and the instructions for future

reference.

The following symbols are used in the user

manual or on the product:

Denotes risk of personal injury, loss of life

or damage to the tool in case of

nonobservance of the instruction in this

manual

Caution, risk of electric shock

Wear eye protection

Wear ear protectors. Exposure to noise

can cause hearing loss.

Wear a dust mask

Danger area! Keep hands, fingers or arms

away from this area.

Danger Area! Keep hands far away

(10cm) from the cutting area while the

machine is running. Danger of injury

when coming in conatct with the saw

blade

Do not direct the laser beam at persons or

animals and do not stare into the laser

beam yourself, not even from a distance.

This power tool produced laser class 2

laser radiation according to EN 60825-1.

This lead can lead to person being blinded

Disc dimensions. Observe the dimensions

of the saw blade.

Transport the machine only when the

machine is in inward transport position

SPECIFIC SAFETY INSTRUCTIONS

• Mitre saws are intended to cut wood or

wood-like products, they cannot be used

with abrasive cut-off wheels for cutting

ferrous material such as bars, rods, studs,

etc. Abrasive dust causes moving parts such

as the lower guard to jam. Sparks from abrasive

cutting will burn the lower guard, the kerf insert

and other plastic parts.

• Use clamps to support the workpiece

whenever possible. If supporting the

workpiece by hand, you must always keep

your hand at least 100 mm from either side

of the saw blade. Do not use this saw to

cut pieces that are too small to be securely

clamped or held by hand. If your hand is

placed too close to the saw blade, there is an

increased risk of injury from blade contact.

• The workpiece must be stationary and

clamped or held against both the fence

and the table. Do not feed the workpiece

into the blade or cut “freehand” in any way.

Unrestrained or moving workpieces could be

thrown at high speeds, causing injury.

• Push the saw through the workpiece. Do not

pull the saw through the workpiece. To make

a cut, raise the saw head and pull it out over

the workpiece without cutting, start the

motor, press the saw head down and push

the saw through the workpiece. Cutting on

the pull stroke is likely to cause the saw blade

to climb on top of the workpiece and violently

throw the blade assembly towards the operator.

• Never cross your hand over the intended

line of cutting either in front or behind the

saw blade. Supporting the workpiece “cross

handed” i.e. holding the workpiece to the right

of the saw blade with your left hand or vice

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ferm MSM1040 in the language / languages: English, German, Dutch, French, Italian, Turkish, Spanish as an attachment in your email.

The manual is 17,22 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ferm MSM1040 Manual

Product: