510117
5
Zoom out
Zoom in
Previous page
1/56
Next page
EN
5
Ferm
TABLE SAW / MITRE SAW
The numbers in the following text correspond
with the pictures at page 2 - 4
Before using the machine, thoroughly
read these instructions for use. Make
sure that you know how the machine
works and how to operate it. Maintain the
machine according to the instructions and
make sure that it works properly. Keep
these instructions for use and the other
documentation with the machine.
Contents
1. Machine information
2. Safety
3. Mounting accessories
4. Operating
5. Service and Maintenance
1. Machine information
Introduction
The bench saw – mitre saw is for sawing wood
and woody pieces of work.
Specifications
Voltage 230 V ~
Capacity 1300 W
Machine class II (double insulated)
Revolutions, not under load 5000 rpm
Saw blade measurement 210 x 30 x 2.6mm
Angle for mitring 45º (left and right)
Angle for bevelling 45º (only left)
Table saw maximum
sawing capacity 30 mm
Mitre saw maximum
sawing capacity:|
- Mitre 0º, Bevel 0º 120 x 60mm
- Mitre 45º, Bevel 45º 90 x 40mm
- Mitre 45º, Bevel 0º 90 x 60mm
- Mitre 0º, Bevel 45º 120 x 40mm
Weight 11.2 kg
Lpa (sound pressure) 94.2+3 dB(A)
Lwa (acoustic capacity 107.2+3 dB(A)
Vibration level <2.5 m/s
2
Vibration level
The vibration emission level stated in this
instruction manual has been measured in
accordance with a standardised test given in EN
61029; it may be used to compare one tool with
another and as a preliminary assessment of
exposure to vibration when using the tool for the
applications mentioned
• using the tool for different applications, or with
different or poorly maintainted accessories,
may significantly increase the exposure level
• the times when the tool is switched off or when
it is running but not actually doing the job, may
signifi cantly reduce the exposure level
Protect yourself against the effects of
vibration by maintaining the tool and its
accessories, keeping your hands warm, and
organizing your work patterns.
Contents of the packaging
1 Table saw / mitre saw
1 Dust bag
1 Parallel guide
1 Flange key for changing the saw blade
1 Socket spanner
1 Allen key
1 Stick for pushing the work
1 Instructions for use
1 Safety instructions
1 Guarantee card
Part names
Figs. 1 to 4
1. On/off switch (cross-cut saw)
2. Operating handgrip
3. Unlocking button
4. Upper bench surface locking screw
5. Dust bag connection
6. Rotary knob for bevelling
7. Scale for bevelling
8. Locking knob
9. Locking knob for setting the mitre angle
10. Scale for bevelling angle
11. Mounting hole
12. Mitre saw surface
13. Guide stop
14. Saw blade protector
15. On/off switch (bench saw)
16. Lower protective hood
17. Guide
18. Upper bench surface
19. Upper saw blade protector
20. Riving knife
21. Flange
22. Saw blade
23. Saw blade bolt
24. Bench inlay
25. Degree arc
26. Clamp screws
27. Flange key
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferm MSM1033 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferm MSM1033 in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 2,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info