RADIAL MITRE SAW
THE NUMBERS IN THE FOLLOWING TEXT
CORRESPOND WITH THE PICTURES AT PAGE 2
& 3
Caution! For your own safety, carefully read these
instructions for use before using the machine.
CONTENTS:
1. Machine information
2. Safety
3. Mounting accessories
4. Operation
5. Service & Maintenance
1. MACHINE INFORMATION
INTENDED USE
The electro tool is intended as a stationary machine for
making straight lengthways and crossways cuts in wood.
Horizontal mitre angles of -45° to +45° as well as vertical
bevel angles of -45° are possible.
TECHNICAL SPECIFICATION
FEATURES
Figs. 1, 2 and 3
1. On/off switch
2. Unlock button (On/off switch)
3. Unlock button (Blade protective cover)
4. Cover carbon brush
5. Lock-pin
6. Blade protective cover
7. Workpiece clamp
8. Guide fence
9. Knob adjusting saw angle
10. Locking knob
11. Fixing knob clamp
12. Handle adjusting bevel angle
13. Connection dust bag
14. Slide rail
15. Bevel angle
16. Handle
17. Cover
18. Saw blade bolt
19. Flange
20. Screw
21. Extension pieces (left and right)
22. Lock-button saw blade
23. Bolts
PACKAGE CONTENTS
1 Radial mitre saw
1 Dust bag
1 Clamp
1 Key for changing the saw blade
1 Support bar
1 Instructions for use
1 Safety instructions
1 Guarantee card
Check the machine, loose parts and accessories for any
transport damage.
2. SAFETY
When using the machine, always carefully follow
the safety precautions supplied and the safety
instructions given below.
LIST OF SYMBOLS
The following pictograms are used in these instructions
and on the machine itself:
CE Conforms to the applicable European safety
standards
Class II equipment – doubly insulated – the plug
does not have to be earthed
Danger of bodily injury or material damage.
Indicates electrical shock hazard.
Read the instructions
Keep bystanders at a distance
Immediately unplug the plug from the mains
electricity in the case that the cord gets damaged
and during maintenance
Wear eye and ear protectors
Faulty and/or discarded electrical or electronic
apparatus have to be collected at the appropriate
recycling locations.
BEFORE EACH USE OF THE SAW
Check the machine. If any part of the machine is missing,
bent or in any other way unusable, or when an electrical
Voltage | 230 V ~
Capacity | 1600 W
Machine class | II (double
| insulated)
Revolutions, not under load | 4800/min
Saw blade measurement | 210x16x2.6mm
Angle for mitring | 45º (left and right)
Angle for bevelling | 45º (only left)
Mitre saw maximum
sawing capacity:
Mitre 0º, Bevel 0º | 65x200 mm
Mitre 45º, Bevel 45º | 35x145 mm
Mitre 45º, Bevel 0º | 65x145 mm
Mitre 0º, Bevel 45º | 35x200 mm
Weight | 15.0 kg
Lpa (sound pressure) | 86.3 dB(A)
Lwa (acoustic capacity) | 99.3 dB(A)
Vibration level | 1.146 m/s
2
4 Ferm Ferm 57