Manual Ferm MSM1007 - FKZ210N (page 9 of 52) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish)

632958

Zoom out

Zoom in

1/52

Ferm 9

Changing the saw blade

Fig. 3

Only use saw blades that are sharp and undamaged. You must immediately replace

chipped or bent saw blades.

Make sure that the plug is not in the socket!

• Unscrew the screw (11) by one turn (anticlockwise).

• Bring the hood (14) downwards.

• Put the key (18) in the holes of the flange (13) and unscrew the bolt (12) with the box

spanner (15) (clockwise).

• Remove the saw blade flange (13) and change the blade. Make sure that the blade is

mounted in the machine correctly (with the arrow on the blade pointing clockwise).

• Replace the flange (13) and screw the bolt (12) tight again with the box spanner (15)

(anticlockwise).

• Move the hood (14) back again and screw the screw (11) tight again (clockwise).

Adjusting the saw angle

Fig. 2

• Unscrew the knob (7) a half turn clockwise.

• Turn the machine to the desired angle (the angle can be read off on the front of the

machine).

• Screw up the knob (7) a half turn anticlockwise.

Setting up the double sawing angle / mitring

Fig. 2

• Adjust the first angle as described for adjusting the saw angle (above).

• Turn the knob (9) anticlockwise and then set the angle desired (you can read this off on the

back of the machine). Then tighten the knob (9) again by turning it clockwise.

Changing the carbon brushes

Fig. 1

Make sure that the plug is not in the socket!

• Unscrew the covers (3) with a flat bladed screwdriver. Remove the carbon brushes with the

same type of brushes. Screw the covers (3) tight again.

Note: Always replace both carbon brushes at the same time. Never use a mixture of old and

new brushes.

Mounting the dust bag

Press in the clamp of the dust bag (10) and slide it onto the opening on the back of the machine.

FIN

Ferm

Kontroller, at stikket ikke er sat i stikkontakten!

• Løsn skrue (11) en omgang (mod uret).

• Før kappen (14) ned.

• Sæt nøglen (18) i hullerne i flangen (13) og løsn bolten (12) med stjernenøglen (15) (med

uret).

• Tag flangen (13) af og skift klinge. Sørg for, at klingen er monteret korrekt i maskinen (med

pilen på klingen pegende med uret).

• Sæt flangen (13) på og stram bolten (12) til igen med stjernenøglen (15) (mod uret).

• Bevæg kappen (14) tilbage igen og stram skruen (11) til (med uret).

Justering af savevinklen

Fig. 2

• Løsn knappen (7) en halv omgang (med uret).

• Drej maskinen til den ønskede vinkel (vinklen kan aflæses på skalaen foran på maskinen).

• Stram knappen (7) en halv omgang (mod uret).

Indstilling af dobbelt savevinkel / gering

Fig. 2

• Indstil den første vinkel som beskrevet under justering af savevinkel (ovenfor).

• Drej knappen (9) mod uret og indstil derefter den ønskede vinkel (kan aflæses bag på

maskinen). Stram knappen (9) til igen ved at dreje den med uret.

Udskiftning af kontaktkul

Fig. 1

Kontroller, at stikket ikke er sat i stikkontakten!

• Skru dækslet (3) af med en almindelig skruetrækker. Udskift kontaktkullene med kul af

samme type. Skru dækslet (3) på igen.

Bemærk: Begge kontaktkullene skal udskiftes på samme tid. Der må ikke bruges et gammelt

og et nyt kontaktkul.

Påsætning af støvposen

Tryk klemmen på støvposen (10) ind og sæt den på åbningen bag i maskinen. Når klemmen

slippes, bliver posen siddende.

FIN

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ferm MSM1007 - FKZ210N in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 8,4 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ferm MSM1007 - FKZ210N Manual

Product: