Manual Ferm MSM1001 - FKZ205 (page 6 of 26) (English, German, Dutch, Danish, French, Italian, Swedish, Norwegian, Finnish)

632954

Zoom out

Zoom in

1/26

• èÓ‰ÍÎ˛˜ËÚÂ ÔËÎÛ Í ÒÂÚË 230 Ç.

• ÖÒÎË ‰‚Ë„‡ÚÂÎ¸ ÌÂ Á‡ÔÛÒÍ‡ÂÚÒﬂ, ÒÎÂ‰ÛÂÚ

ÌÂÏÂ‰ÎÂÌÌÓ ÓÚÔÛÒÚËÚ¸ ‚˚ÍÎ˛˜‡ÚÂÎ¸. Ç˚Ì¸ÚÂ

‚ËÎÍÛ ËÁ ÓÁÂÚÍË. èÓ‚Â¸ÚÂ, ÏÓÊÂÚ ÎË ÔËÎ¸Ì˚È

‰ËÒÍ Ò‚Ó·Ó‰ÌÓ ‰‚Ë„‡Ú¸Òﬂ, Ë ÔÓ‚ÚÓÌÓ Á‡ÔÛÒÚËÚÂ

ÔËÎÛ.

• ÖÒÎË ‰‚Ë„‡ÚÂÎ¸ ‚Ó ‚ÂÏﬂ ÔÓˆÂÒÒ‡ ÚÓˆÂ‚‡ÌËﬂ

‚ÌÂÁ‡ÔÌÓ ÓÒÚ‡Ì‡‚ÎË‚‡ÂÚÒﬂ, ÒÎÂ‰ÛÂÚ ÚÓÚ˜‡Ò ÊÂ

ÓÚÔÛÒÚËÚ¸ ‚˚ÍÎ˛˜‡ÚÂÎ¸. Ç˚Ò‚Ó·Ó‰ËÚÂ ÔËÎ¸Ì˚È

‰ËÒÍ ËÁ Á‡„ÓÚÓ‚ÍË, ÔÓÒÎÂ ˝ÚÓ„Ó ÔÓˆÂÒÒ

ÚÓˆÂ‚‡ÌËﬂ ÏÓÊÂÚ ·˚Ú¸ ÔÓ‰ÓÎÊÂÌ.

• èË ËÒÔÓÎ¸ÁÓ‚‡ÌËË ‰ÎËÌÌ˚ı Í‡·ÂÎÂÈ Ï‡ÎÓ„Ó

ÒÂ˜ÂÌËﬂ ‚ÓÁÌËÍ‡˛Ú ÔÓÚÂË Ì‡ÔﬂÊÂÌËﬂ, ÍÓÚÓ˚Â

ÏÓ„ÛÚ ÔË‚ÂÒÚË Í ÔÂÂ„ÛÁÍÂ ‰‚Ë„‡ÚÂÎﬂ.

Û Í‡·ÂÎﬂ ‰ÎËÌÓÈ 15 Ï Â„Ó ÒÂ˜ÂÌËÂ ‰ÓÎÊÌÓ ·˚Ú¸

1,5 ÏÏ

Û Í‡·ÂÎﬂ ‰ÎËÌÓÈ ÓÚ 15 ‰Ó 40 Ï Â„Ó ÒÂ˜ÂÌËÂ

‰ÓÎÊÌÓ ·˚Ú¸ 2,5 ÏÏ

èéÑÉéíéÇäÄ

ìÒÚ‡ÌÓ‚ËÚÂ ÚÓˆÓ‚Ó˜ÌÛ˛ ÔËÎÛ Ì‡ Ó‚ÌÓÂ,

ÛÒÚÓÈ˜Ë‚ÓÂ ÓÒÌÓ‚‡ÌËÂ. í‡ÍÊÂ ÚÓˆÓ‚Ó˜Ì‡ﬂ ÔËÎ‡

ÏÓÊÂÚ ÍÂÔËÚ¸Òﬂ Í ‚ÂÒÚ‡ÍÛ. èÓÁ‡·ÓÚ¸ÚÂÒ¸ Ó ÚÓÏ,

˜ÚÓ·˚ ‡·Ó˜ÂÂ ÏÂÒÚÓ ·˚ÎÓ Û·‡ÌÓ Ë Ì‡ıÓ‰ËÎÓÒ¸ ‚

˜ËÒÚÓÚÂ.

êÄáÅãéäàêéÇäÄ èàãõ

êËÒ. 1

ãÂ‚ÓÈ ÛÍÓÈ Ì‡ÊÏËÚÂ ÓÚÂÁÌÛ˛ „ÓÎÓ‚ÍÛ ‚ÌËÁ Ë

‚˚ÚﬂÌËÚÂ ·ÎÓÍËÓ‚Ó˜ÌÛ˛ ÍÌÓÔÍÛ (Ä).

ê‡Á·ÎÓÍËÓ‚Ó˜Ì‡ﬂ ÍÌÓÔÍ‡ Ì‡ıÓ‰ËÚÒﬂ ÒÔ‡‚‡ Ì‡

Ú˚Î¸ÌÓÈ ÒÚÓÓÌÂ ÓÚÂÁÌÓÈ „ÓÎÓ‚ÍË. ä‡Í ÚÓÎ¸ÍÓ

‡Á·ÎÓÍËÓ‚Ó˜Ì‡ﬂ ÍÌÓÔÍ‡ ‚˚ÚﬂÌÛÚ‡, ‚ÂÌËÚÂ

ÓÚÂÁÌÛ˛ „ÓÎÓ‚ÍÛ ‚ ‚ÂıÌÂÂ ÔÓÎÓÊÂÌËÂ. ÇÒÎÂ‰ Á‡

˝ÚËÏ, Ì‡Ê‡ÚËÂÏ ‡Á·ÎÓÍËÓ‚Ó˜ÌÓÈ ÍÌÓÔÍË ÓÚÂÁÌ‡ﬂ

„ÓÎÓ‚Í‡ ÏÓÊÂÚ ·˚Ú¸ ÔÂÂ‰‚ËÌÛÚ‡ ‚ÌËÁ (2).

íÓˆÓ‚Ó˜Ì‡ﬂ ÔËÎ‡ Ì‡ÒÚÓÂÌ‡ Á‡‚Ó‰ÓÏ-

ËÁ„ÓÚÓ‚ËÚÂÎÂÏ Ì‡ 45° (ÒÔ‡‚‡ Ë ÒÎÂ‚‡). ìÊÂ ÔË

ÔÂ‚ÓÏ ÚÓˆÂ‚‡ÌËË ÔÓ‚Â¸ÚÂ, ‚˚ÒÚ‡‚ÎÂÌ ÎË

ÔËÎ¸Ì˚È ‰ËÒÍ ÔÂÔÂÌ‰ËÍÛÎﬂÌÓ ÔÓ ÓÚÌÓ¯ÂÌË˛ Í

ÌËÊÌÂÈ ÒÚÓÓÌÂ ÔËÎ˚ Ë ÒÚÓÎ‡. ÑÎﬂ ÚÓ„Ó ˜ÚÓ·˚

ÔÓËÁ‚ÂÒÚË ‚ÓÁÏÓÊÌÛ˛ ÍÓÂÍÚËÓ‚ÍÛ, ÒÎÂ‰ÛÂÚ

ÔÓ‚ÂÌÛÚ¸ ÒÍÓÎ¸Áﬂ˘ËÂ Ì‡ÒÚÓÂ˜Ì˚Â ‚ËÌÚ˚, ÍÓÚÓ˚Â

Ì‡ıÓ‰ﬂÚÒﬂ Ì‡ Ó·ÂËı ÒÚÓÓÌ‡ı ÔË„ÓÌÓ˜ÌÓÈ ‰ÂÚ‡ÎË.

ÑÎﬂ ÚÓ„Ó ˜ÚÓ·˚ ÔÓÎÛ˜ËÚ¸ ÔÓÔËÎ ÔÓ‰ Û„ÎÓÏ 45°,

ÔÓ‚ÓÓÚÌ‡ﬂ ÛÍÓﬂÚÍ‡ ÛÒÚ‡Ì‡‚ÎË‚‡ÂÚÒﬂ Ú‡ÍËÏ ÊÂ

Ó·‡ÁÓÏ ÔÓ‰ Ì‡ÍÎÓÌÓÏ.

àëèéãúáéÇÄçàÖ èàãõ

ëÓÒÚÓﬂÌËÂ ÔËÎ¸ÌÓ„Ó ‰ËÒÍ‡ ÒÎÂ‰ÛÂÚ

ÔÓ‚ÂﬂÚ¸ ÔÂÂ‰ Í‡Ê‰˚Ï ËÒÔÓÎ¸ÁÓ‚‡ÌËÂÏ.

êËÒ. 1

• íÓˆÓ‚Ó˜Ì‡ﬂ ÔËÎ‡ ‚ÍÎ˛˜‡ÂÚÒﬂ ÔË ÔÓÏÓ˘Ë

ÍÌÓÔÍË ‚˚ÍÎ˛˜‡ÚÂÎﬂ Ì‡ ‚ÌÛÚÂÌÌÂÈ ÒÚÓÓÌÂ

ÛÍÓﬂÚÍË (1).

• èÂÂ‰ Ì‡˜‡ÎÓÏ ÔÓˆÂÒÒ‡ ÚÓˆÂ‚‡ÌËﬂ ÔËÎ¸Ì˚È

‰ËÒÍ ‰ÓÎÊÂÌ ‰ÓÒÚË˜¸ Ï‡ÍÒËÏ‡Î¸ÌÓÈ ÒÍÓÓÒÚË

‚‡˘ÂÌËﬂ.

• åÂ‰ÎÂÌÌÓ Ë ‡‚ÌÓÏÂÌÓ Ì‡ÊÏËÚÂ ÓÚÂÁÌÛ˛

„ÓÎÓ‚ÍÛ ‚ÌËÁ ÔË ÔÓÏÓ˘Ë ÛÍÓﬂÚÍË.

• èËÎ‡„‡ÈÚÂ Ú‡ÍÓÂ ‰‡‚ÎÂÌËÂ Ì‡ ÓÚÂÁÌÛ˛ „ÓÎÓ‚ÍÛ,

ÍÓÚÓÓÂ ÒÓÓÚ‚ÂÚÒÚ‚ÛÂÚ ÚËÔÛ Ó·‡·ÓÚÍË Ë

‡ÁÏÂ‡Ï Á‡„ÓÚÓ‚ÍË.

• ÇÓ ‚ÂÏﬂ ÚÓˆÂ‚‡ÌËﬂ Á‡„ÓÚÓ‚Í‡ ‰ÓÎÊÌ‡ ÔÓ˜ÌÓ

ÔËÊËÏ‡Ú¸Òﬂ Í ÒÚÓÎÛ.

• ÑÎﬂ ÚÓ„Ó ˜ÚÓ·˚ ‡ÒÔËÎËÚ¸ ‰ÎËÌÌ˚Â Á‡„ÓÚÓ‚ÍË,

Ç‡Ï ÒÎÂ‰ÛÂÚ ËÒÔÓÎ¸ÁÓ‚‡Ú¸ ‰ÓÔÓÎÌËÚÂÎ¸Ì˚Â

ÓÔÓ˚ ‰Îﬂ ÔÓ‰‰ÂÊ‡ÌËﬂ ‡ÒÔËÎË‚‡ÂÏÓÈ

Á‡„ÓÚÓ‚ÍË.

• èÓÒÎÂ Á‡‚Â¯ÂÌËﬂ Ó·‡·ÓÚÍË Á‡„ÓÚÓ‚ÍË „ÓÎÓ‚Í‡

‰ÓÎÊÌ‡ ·˚Ú¸ ÔË‚Â‰ÂÌ‡ ‚ ËÒıÓ‰ÌÓÂ ÔÓÎÓÊÂÌËÂ.

• èËÎ¸Ì˚È ‰ËÒÍ ‰ÓÎÊÂÌ Â„ÛÎﬂÌÓ Á‡Ú‡˜Ë‚‡Ú¸Òﬂ, ‡

Ú‡ÍÊÂ, ÂÒÎË ÌÂÓ·ıÓ‰ËÏÓ, Á‡ÏÂÌﬂÚ¸Òﬂ.

ÑàÄÉéçÄãúçéÖ íéêñÖÇÄçàÖ

êËÒ. 1

• ÑÎﬂ ‰Ë‡„ÓÌ‡Î¸ÌÓ„Ó ÚÓˆÂ‚‡ÌËﬂ ÔÓ‰ Û„ÎÓÏ 45°

ÌÂÓ·ıÓ‰ËÏÓ ÓÚ‚ÂÌÛÚ¸ „‡ÈÍÛ ÚÓˆÂ‚˚Ï ÍÎ˛˜ÓÏ

Ì‡ Ú˚Î¸ÌÓÈ ÒÚÓÓÌÂ ÔËÎ˚ (12).

• èË‚Â‰ËÚÂ ÓÚÂÁÌÛ˛ „ÓÎÓ‚ÍÛ Ò ÎÂ‚ÓÈ ÒÚÓÓÌ˚ ‚

ÌÂÓ·ıÓ‰ËÏÓÂ ÔÓÎÓÊÂÌËÂ Ì‡ÒÚÓÈÍË – 45°.

•èÂÊ‰Â ˜ÂÏ Ç˚ Ì‡˜ÌÂÚÂ ÚÓˆÂ‚‡ÌËÂ, Á‡ÚﬂÌËÚÂ

„‡ÈÍÛ ‚ËÌÚ‡.

ÉéêàáéçíÄãúçéÖ íéêñÖÇÄçàÖ

êËÒ. 1

• ÉÓÎÓ‚Í‡ ÏÓÊÂÚ ÔÓ‚Ó‡˜Ë‚‡Ú¸Òﬂ Ì‡ Û„ÓÎ ‰Ó 45°

‚ÎÂ‚Ó Ë ‚Ô‡‚Ó.

• ç‡ıÓ‰ﬂ˘ËÂÒﬂ ‚ ˝ÚÓÏ ‰Ë‡Ô‡ÁÓÌÂ Û„ÎÓ‚˚Â

ÁÌ‡˜ÂÌËﬂ ÏÓ„ÛÚ Ì‡ÒÚ‡Ë‚‡Ú¸Òﬂ ·ÂÁ ÔÓ·ÎÂÏ,

ÔË˜ÂÏ ÌÂÓ·ıÓ‰ËÏ‡ﬂ Ì‡ÒÚÓÈÍ‡ ÏÓÊÂÚ ·˚Ú¸

Ò˜ËÚ‡Ì‡ Ì‡ ËÌ‰ËÍ‡ˆËË Û„ÎÓ‚Ó„Ó ÁÌ‡˜ÂÌËﬂ.

• ÑÎﬂ ÚÓ„Ó ˜ÚÓ·˚ Ì‡‰ÂÊÌÓ ÛÒÚ‡ÌÓ‚ËÚ¸ ÔÓ‰

ÌÂÓ·ıÓ‰ËÏ˚Ï Û„ÎÓÏ ËÎË ‚˚Ó‚ÌﬂÚ¸ „ÓÎÓ‚ÍÛ ÔËÎ˚,

Ó·‡ ÛÒÚ‡ÌÓ‚Ó˜Ì˚ı ÒÍÓÎ¸Áﬂ˘Ëı ‚ËÌÚ‡ ÒÏÂ˘‡˛ÚÒﬂ (6).

• ìÔÓ ÔÓ‰ Û„ÎÓÏ 45° - ˝ÍÒˆÂÌÚËÍÓ‚˚È ‰Îﬂ ÚÓ˜ÌÓÈ

Ì‡ÒÚÓÈÍË (8).

äéåÅàçàêéÇÄççéÖ íéêñÖÇÄçàÖ

ÇÓÁÏÓÊÌ‡ ÍÓÏ·ËÌ‡ˆËﬂ ‰Ë‡„ÓÌ‡Î¸ÌÓ„Ó Ë

‚ÂÚËÍ‡Î¸ÌÓ„Ó ÚÓˆÂ‚‡ÌËﬂ.

áÄåÖçÄ èàãúçéÉé ÑàëäÄ

êËÒ. 1

ëÌ‡˜‡Î‡ ÔËÎ¸Ì˚È ‰ËÒÍ ‰ÓÎÊÂÌ ÔÓÎÌÓÒÚ¸˛

ÓÒÚ‡ÌÓ‚ËÚ¸Òﬂ, Á‡ÚÂÏ ‚˚Ì¸ÚÂ ‚ËÎÍÛ ËÁ

ÓÁÂÚÍË.

• ëÌËÏËÚÂ Á‡˘ËÚÌ˚È ÍÓÊÛı (11). èÓÒÎÂ ˝ÚÓ„Ó

Á‡ÊÏËÚÂ ‚ÌÂ¯ÌËÂ ÙÎ‡Ìˆ˚ ÔËÎ‡„‡˛˘ËÏÒﬂ

ÍÎ˛˜ÓÏ Ë ÔÓ‚ÂÌËÚÂ ÙÎ‡Ìˆ˚ Ò ÔÓÏÓ˘¸˛

ÚÓˆÂ‚Ó„Ó ÍÎ˛˜‡ ÔÓ ˜‡ÒÓ‚ÓÈ ÒÚÂÎÍÂ.

• ëÌËÏËÚÂ ÔËÎ¸Ì˚È ‰ËÒÍ Ë Á‡ÏÂÌËÚÂ Â„Ó, ÔË˜ÂÏ

ÁÛ·¸ﬂ ‰ÓÎÊÌ˚ ÛÍ‡Á˚‚‡Ú¸ ‚ ÒÚÓÓÌÛ ÒÚÂÎÍË.

• èÂÊ‰Â ˜ÂÏ Ç˚ ÒÏÓÊÂÚÂ ÛÒÚ‡ÌÓ‚ËÚ¸ ÔËÎ¸Ì˚È

‰ËÒÍ, Ç‡Ï ÌÂÓ·ıÓ‰ËÏÓ ÒÌ‡˜‡Î‡ ÔÓ˜ËÒÚËÚ¸

ÙÎ‡Ìˆ˚.

• ÇÌÓ‚¸ ÛÒÚ‡ÌÓ‚ËÚÂ ‚ÌÂ¯ÌËÂ ÙÎ‡Ìˆ˚ ‚ ÔÓÁËˆË˛ Ë

Á‡ÚﬂÌËÚÂ Ëı.

• èÂÂ‰ ‚ÍÎ˛˜ÂÌËÂÏ ÔËÎ˚ ‚ ÒÂÚ¸, Á‡˘ËÚÌÓÂ

ÛÒÚÓÈÒÚ‚Ó ÔËÎ¸ÌÓ„Ó ‰ËÒÍ‡ ‰ÓÎÊÌÓ ·˚Ú¸

ÔË‚Â‰ÂÌÓ ‚ ËÒıÓ‰ÌÓÂ ÔÓÎÓÊÂÌËÂ.

• èÓ ‚ÓÁÏÓÊÌÓÒÚË ÔÓËÁ‚Â‰ËÚÂ ÔÓ·Ì˚È ‡ÁÂÁ,

ÔÓ‰Ìﬂ‚ ÓÚÂÁÌÛ˛ „ÓÎÓ‚ÍÛ ‚‚Âı Ë Ì‡Ê‡‚ ÂÂ ‚ÌËÁ.

Ferm 47

1. The electric motor becomes excessively hot

• The cool air slots of the motor are blocked with dirt.

Clean the cool air slots.

• The motor is faulty.

Present the machine to your Ferm dealer for checking

and/or repair.

2. The machine does not work when switched on

• The saw blade is jammed.

Check the machine for objects which are causing it to

jam and remove them.

• Interruption in the mains connection.

Check the mains connection for breakage.

Present the machine to your Ferm dealer for checking

and/or repair.

3. The motor stops during sawing

• The saw blade is jammed in the workpiece.

Release the switch, remove the plug from the power

point and loosen the saw.

• Interruption in the mains connection

Check the mains connection for breakage.

Present the machine to your Ferm dealer for checking

and/or repair.

4. The dust is not being vacuumed up

• This is possibly due to a blocked dust extraction.

Clean the dust extractor opening.

MAINTENANCE

For maintenance work and cleaning, always

disconnect the machine from the mains voltage.

Never use water or highly inflammable liquids for cleaning the

machine. Clean the machine using a brush.

PERIODICAL MAINTENANCE TO THE MACHINE

PREVENTS UNNECESSARY PROBLEMS!

• Keep the ventilation slots of the machine clean in

order to prevent overheating of the motor.

• In order to prevent damage to the motor and to

make an optimal use of an ideal cooling of the motor,

chips and dust must be removed regularly from it.

• Do not use solvents to clean the plastic parts. Liquids

such as brake fluid, petrol, products on a paraffin

base, pickling oils etc. contain chemical substances

which can damage, corrode or destroy the plastic.

The Ferm machines have been designed to operate over

a long period of time with a minimum of maintenance.

Continuous satisfactory operation depends upon

proper machine care and regular cleaning.

CLEANING

Keep the ventilation slots of the machine clean to

prevent overheating of the engine. Regularly clean the

machine housing with a soft cloth, preferably after each

use. Keep the ventilation slots free from dust and dirt. If

the dirt does not come off use a soft cloth moistened

with soapy water. Never use solvents such as petrol,

alcohol, ammonia water, etc. These solvents may

damage the plastic parts.

LUBRICATION

The machine requires no additional lubrication.

FAULTS

Should a fault occur, e.g. after wear of a part, please

contact the service address on the warranty card. In the

back of this manual you find an exploded view showing

the parts that can be ordered.

ENVIRONMENT

In order to prevent the machine from damage during

transport, it is delivered in a sturdy packaging. Most of the

packaging materials can be recycled. Take these materials

to the appropriate recycling locations. Take your

unwanted machines to your local Ferm-dealer. Here they

will be disposed of in an environmentally safe way.

GUARANTEE

The guarantee conditions can be found on the separately

enclosed guarantee card.

We declare under our sole responsibility that this

product is in conformity with the following

standards or standardized documents

EN61029-1, prEN61029-2-9, EN55014-1,

EN55014-2, EN61000-3-2, EN61000-3-3

in accordance with the regulations:

98/37/EEC, 73/23/EEC , 89/336EEC

vom 01-12-2004

ZWOLLE NL

W. Kamphof

Quality Department

DECLARATION OF CONFORMITY

(

)

6 Ferm

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ferm MSM1001 - FKZ205 in the language / languages: English, German, Dutch, Danish, French, Italian, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 3,73 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ferm MSM1001 - FKZ205 Manual

Product: