800235

Ferm MSA1030 Manual

6
Zoom out
Zoom in
Previous page
1/24
Next page
6
EN
2. PRODUCT INFORMATION
Intended use
This product is designed and intended for
domestic use, for general purpose tool stand use
in home and garden environments and for hobby
purposes. This workbench is not developed
for professional use. The Workbench must be
handled, cared for and maintained in accordance
with these instructions. Any other use is deemed
improper and may result in damage to property or
personal injury.
The universal tool stand is designed for use
with tabletop devices such as mitre saws, scroll
saws, etc. Electric power tools without suitable
mounting holes are not permitted to be fitted to
the universal tool stand and shall not be operated
in conjunction with the universal tool stand.
Electric power tools must be firmly bolted to the
universal tool stand before starting them up.
The universal tool stand is also designed as a
workpiece support when working with mitre
saws, scroll saws, and other similar electric
power tools. The maximum workpiece length is
3m. Additional workpiece supports may have to
be used (e.g. a roller trestle) in order to prevent
longer workpieces tilting. Attention: Ensure that
the workpiece support is secure and not tilted!
Technical specifications
Model No. MSA1030
Max. permissible load 150kg
Opened dimensions L: 935-1945mm
W: 640mm
H: 825-935mm
Closed dimensions L: 984mm
W: 415mm
H: 224mm
Weight 9.9 kg
DESCRIPTION
The numbers in the following text refer to the pic-
tures on pages 2-4.
1. Roller
2. Workpiece support
3. Workpiece support knob
4. Extension arm
5. End stop
6. Extension arm knob
7. Mitre saw mounting bar
8. Carrying handle
9. Frame
10. Pin slot
11. Spring-loaded pin
12. Leg
13. Foot
14. Mounting bar lever
15. Mitre saw mounting hardware (bolts, washers,
spring washers, nuts)
3. ASSEMBLY
Study each figure and identify the
components required with reference to
the contents table above.
Unfolding The Stand (fig. A)
1. Lay the mitre saw stand on the floor with the
folded legs (12) facing upwards.
2. Depress the spring-loaded pin (11) and unfold
the two upper legs (12) until the spring-loaded
pin (11) clicks into the pin slot (10).
3. Repeat the same procedure for the other two
legs.
4. Lift the stand and flip it into the upright
position.
5. Check that the stand is stable and all of the
leg locking pins have engaged properly.
Folding The Stand
One pair of legs on the stand must fold firstly for
the stand to fold flat. The legs have not folded
into place if the spring-loaded pins (11) do not
pop into place. The legs should not swing about
when the stand is picked up if the legs have
locked into position.
1. Turn the mitre saw stand upside down on the
floor with the legs (12) sticking up.
2. Depress the spring-loaded pin (11) on the
lower pair of legs and fold them in.
3. Repeat the same procedure on the other pair
of legs.
Attaching The Extension Arms (Fig. B)
1. Slide the extension arm (4) into the frame (9)
until the desired length is reached.
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferm MSA1030 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferm MSA1030 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 3.03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info