381265

Ferm li ion fdsc 360 lk Manual

6
Zoom out
Zoom in
Previous page
1/96
Next page
6
EN
4. OPERATION
Always observe the safety instructions
and appli cable regulations.
Firmly hold the machine and ferm the bit with
even pressure into the workpiece. Do not force
the machine. Use only bits that do not yet show
any signs of wear. Worn bits have a negative
effect on the efciency of the machine.
Locking the screwdriver
Fig. 8
The screwdriver is tted with an automatic spindle
lock feature. When the On/Off switch (2) is not
pressed, the spindle is locked. Now it is possible
to use the screwdriver (even when the battery is
empty) as a manual tool.
Screwdriving
Fig. 1
• To switch the tool on, press the On/Off switch
(2).
• Press the tumbler switch (R) for clockwise
rotation (tightening screws)
• Press the tumbler switch (L) for
counterclockwise rotation (loosening screws)
To switch the tool off, release the on/off switch.
The white LED will illuminate when the tumbler
switch is pressed.
Warning! Looking straight into LED light
for a prolonged period of time from close
distance can cause damage to the eyes.
User tips for optimum use
• Always hold the tool and screwdriver bit in a
straight line with the screw and always use the
correct type and size of bit.
• If screws are difcult to tighten, try applying a
small amount of washing liquid or soap as a
lubricant (Fig. 9).
• Use the spindle lock feature to loosen very
tight screws or to rmly tighten screws.
• When screwing in wood, it is recommended to
drill a hole with a depth equal to almost the
length of the screw. A pilot hole guides the
screw and prevents splintering or distortion of
the work piece.
5. CHARGING THE BATTERY
Charging Li-Ion battery
Fig. 10
The battery charger supplied is matched to the
Li-Ion battery installed in the machine. Do not use
another battery charger.
The Li-Ion battery is protected against deep
discharging. When the battery is empty, the
machine is switched off by means of a protective
circuit: the tool holder no longer rotates. Caution:
if the On/Off switch is subject to continued use,
the Li-Ion battery can be damaged.
The charging procedure starts as soon as the
mains plug of the battery charger is inserted into
the socket and the adapter plug is connected to
the appliance (the underside of the handgrip).
• Put the adapter plug of the charger into the
handle (underside)
• Plug the mains adapter into the (wall) socket
• The charging process starts; the red LED is
now on
• The battery is fully charged when the red LED
goes out.
• Charging the battery takes maximum 5 hours.
• During the charging procedure, the handgrip of
the machine warms up. This is normal.
6. SERVICE & MAINTENANCE
Make sure that the machine is not live
when carrying out maintenance work on
the motor.
These machines have been designed to operate
over a long period of time with a minimum of
maintenance. Continuous satisfactory operation
depends upon proper machine care and regular
cleaning.
Cleaning
Keep the ventilation slots of the machine clean to
prevent overheating of the engine. Regularly
clean the machine housing with a soft cloth,
preferably after each use. Keep the ventilation
slots free from dust and dirt. If the dirt does not
come off use a soft cloth moistened with soapy
water. Never use solvents such as petrol, alcohol,
ammonia water, etc. These solvents may damage
the plastic parts.
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferm li ion fdsc 360 lk at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferm li ion fdsc 360 lk in the language / languages: English, German, Dutch, Danish, French, Italian, Norwegian as an attachment in your email.

The manual is 16,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info