510095

Ferm JSM1014 Manual

7
Zoom out
Zoom in
Previous page
1/108
Next page
7
EN
ASSEMBLY
3
Before assembly, always switch off the
machine and remove the mains plug
from the mains.

Refer to the table below to select the required
saw blade.
Saw blade Material
Coarse Wood
Medium Wood
Fine Steel,aluminium,plastic
Veryne Wood(curves)
2
Do not attempt to remove the guard from
the machine.
Mounting
● SlackentheAllenscrew(13)usingtheAllen
key(11).
● Insertthesawblade(14)inthesawblade
holder(6)asfaraspossible.Theteethofthe
sawblade(14)mustpointupwardand
forward. The smooth side of the saw blade
mustengageintheslotoftheguideroller(15).
● TightentheAllenscrew(13)usingtheAllen
key(11).
Removing
● SlackentheAllenscrew(13)usingtheAllen
key(11).
● Removethesawblade(14)fromthesaw
bladeholder(6).
● TightentheAllenscrew(13)usingtheAllen
key(11).
Mounting and removing the parallel guide

The parallel guide is used for sawing along edges
at a maximum distance of 16 cm.
Mounting
● Slackenthelockingbolts(8).
● Inserttheparallelguide(16)intothesawshoe
(7).
● Settheparallelguide(16)totherequired
position.
● Tightenthelockingbolts(8).
Removing
● Slackenthelockingbolts(8).
● Removetheparallelguide(16)fromthesaw
shoe(7).
● Tightenthelockingbolts(8).
USE

● Toswitchonthemachine,presstheon/off
switch(1).
● Toswitchthemachinetocontinuousmode,
keeptheon/offswitch(1)pressedand
simultaneouslypressthelock-onbutton(2).
● Toswitchoffthemachine,releasetheon/off
switch(1).

The speed adjustment wheel is used for setting
the sawing speed. The speed adjustment wheel
can be set to 6 positions. The ideal sawing speed
dependsontheproleandtheteethofthesaw
blade and on the material to be worked.
2
Do not set the sawing speed during use.
● Turnthespeedadjustmentwheel(3)tothe
required position.
● Forhardmaterials,useasawbladewithne
teeth and select a lower speed.
● Forsoftmaterials,useasawbladewith
coarse teeth and select a higher speed.

Themitreangleisvariablebetween0°and45°.
2
Do not set the mitre angle during use.
● SlackentheAllenscrews(17)usingtheAllen
key(11).
● Tiltthesawshoe(7)totherequiredposition.
● TightentheAllenscrews(17)usingtheAllen
key(11).

The pendulum action switch is used to set the
way in which the teeth of the saw blade grip the
material. The pendulum action switch can be set
to 4 positions.
2
Do not set the pendulum position during
use.
● Turnthependulumactionswitch(4)to
required position according to the material to
be worked. Refer to the table below to select
the required position.
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferm JSM1014 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferm JSM1014 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 2,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info