Manual Ferm HDM1049P (page 5 of 46) (English, German, Dutch, French, Italian, Turkish, Spanish)

762296

Zoom out

Zoom in

1/46

Changing chisel position

• Push the lock ring (8) forward and turn the

chisel to the desired position.

• Make sure the ring locks back in place before

using the machine.

Setting the auxiliary grip

Fig. A

Mounting

• Loosen the auxiliary grip (7) by turning the

knob counterclockwise.

•

Turn the auxiliary grip (7) to the desired position.

• Tighten the auxiliary grip (7) by turning the

knob clockwise.

4. USE

Switching On/Off

Fig. A

• Switch the machine on by pressing the On/Off

switch (1). When you release the On/Off switch

(1) the machine will turn off.

Hints for optimum use

• Clamp the workpiece. Use a clamping device

for small workpieces.

• Firmly hold the machine by the grip.

• Switch on the machine.

• Do not apply too much pressure on the

machine. Let the machine do the work.

• Switch off the machine and wait for the

machine to come to a complete standstill

before putting the machine down.

5. CLEANING AND

MAINTENANCE

Before cleaning and maintenance, always

switch off the machine and remove the

mains plug from the mains.

Clean the machine casings regularly with a soft

cloth, preferably after each use. Make sure that

the ventilation openings are free of dust and

dirt. Remove very persistent dirt using a soft

cloth moistened with soapsuds. Do not use any

solvents such as gasoline, alcohol, ammonia

etc. Chemicals such as these will damage the

synthetic components.

Defects

The machine should be regularly inspected for

the following possible defects and repaired if

necessary.

• Damage to power cord.

• Broken on/off trigger assembly.

• Short circuiting.

• Damaged moving parts.

Faults

Should a fault occur, e.g. after wear of a part,

please contact your seller or the service address

on the warranty card. Separate you find an

exploded view showing the parts that can be

ordered.

WARRANTY

The warranty conditions can be found on the

separately enclosed warranty card.

ENVIRONMENT

Faulty and/or discarded electrical or

electronic apparatus have to be collected

at the appropriate recycling locations.

Only for EC countries

Do not dispose of power tools into domestic

waste. According to the European Guideline

2012/19/EC for Waste Electrical and Electronic

Equipment and its implementation into national

right, power tools that are no longer usable must

be collected separately and disposed of in an

environmentally friendly way.

The product and the user manual are subject

to change. Specifications can be changed

without further notice.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ferm HDM1049P in the language / languages: English, German, Dutch, French, Italian, Turkish, Spanish as an attachment in your email.

The manual is 6,58 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ferm HDM1049P Manual

Product: