510087
29
Zoom out
Zoom in
Previous page
1/108
Next page
IT
29
Ferm
Dati tecnici
Tensione di alimentazione 220-240 V~
Frequenza di alimentazione 50 Hz
Potenza assorbita 1500 W
Velocità a vuoto 350 - 800 /min
Frequenza d’impatto 1100 - 2700 /min
Diametro max. di foratura
Legno 40 mm
Acciaio 13 mm
Calcestruzzo 36 mm
Peso 6 kg
Rumorosità e vibrazioni
Posizione di percussione
Pressione sonora (Lpa) 98.5 dB(A)
Potenza acustica (Lwa) 109.5 dB(A)
Incertezza (K) 3 dB(A)
Vibrazione impugnatura principale 19.819 m/s
2
Incertezza (K) 1,5 m/s
2
Posizione di percussione/foratura
Pressione sonora (Lpa) 96.88 dB(A)
Potenza acustica (Lwa) 107.88 dB(A)
Incertezza (K) 3 dB(A)
Vibrazione impugnatura principale 24.847 m/s
2
Incertezza (K) 1,5 m/s
2
Indossare protezioni per l’udito.
Livello delle vibrazioni
Il livello di emissione delle vibrazioni indicato sul
retro di questo manuale di istruzioni è stato
misurato in conformità a un test standardizzato
stabilito dalla norma EN 60745; questo
valore può essere utilizzato per mettere a
confronto un l’utensile con un altro o come
valutazione preliminare di esposizione alla
vibrazione quando si impiega l’utensile per le
applicazioni menzionate
• se si utilizza l’utensile per applicazioni diverse,
oppure con accessori differenti o in scarse
condizioni, il livello di esposizione potrebbe
aumentare notevolmente
• i momenti in cui l’utensile è spento oppure è in
funzione ma non viene effettivamente
utilizzato per il lavoro, possono contribuire a
ridurre il livello di esposizione
Proteggersi dagli effetti della vibrazione
effettuando la manutenzione dell’utensile e dei
relativi accessori, mantenendo le mani calde e
organizzando i metodi di lavoro
Descrizione
(fig. A)
Il trapano tassellatore è stato progettato per la
realizzazione di fori su legno, acciaio e muratura.
L’elettroutensile può inoltre essere utilizzato come
martello demolitore in combinazione con gli
scalpelli SDS.
1. Interruttore on/off
2. Selettore trapano
3. Leva di selezione dell’azione di percussione
4. Mandrino
5. Ghiera di serraggio
6. Impugnatura principale
7. Impugnatura ausiliaria
8. Arresto di profondità
9. Punto di lubrificazione
10. Porta-spazzole in carbonio
11. Manopola di regolazione per il controllo della
velocità elettronica
Montaggio
Prima del montaggio, spegnere sempre
l’elettroutensile e disconnettere la spina
di alimentazione dalla rete elettrica.
Montaggio e rimozione dell’accessorio
(fig. B)
Non utilizzare punte per trapano o
scalpelli spuntati o non affilati. Affilare o
sostituire immediatamente le punte per
trapano o gli scalpelli spuntati o non
affilati.
Montaggio
• Applicare alcune gocce d’olio sullo stelo
dell’accessorio.
• Far scorrere indietro la ghiera di serraggio (5).
• Inserire l’accessorio nel mandrino (4).
• Serrare l’accessorio ruotandolo in senso
antiorario finché non si blocca in posizione.
• Rilasciare la ghiera di serraggio (5).
Rimozione
• Far scorrere indietro la ghiera di serraggio (5).
• Rimuovere l’accessorio dal mandrino (4).
• Rilasciare la ghiera di serraggio (5).
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferm HDM1021 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferm HDM1021 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 4,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info