Manual Ferm HDM1014 (page 4 of 76) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish)

510086

Zoom out

Zoom in

1/76

This appliance operates at a

temperature of 600 degrees without

visible signs of this temperature (no

flames), still there is a chance of fire

risk. Watch out for the hot air stream

from the mouth piece. This air stream

can cause burns.

When operating the appliance

• Ifyouaregoingtousethehotairgun,

vapours and gas can be released during

a short time. This can be harmful for your

health. Asthmatics can suffer hindrance of it;

• Beforeconnectingtheplugtothemains

voltage you have to check if the switch is in

position “0”;

• Keepthemainsleadalwaysawayfromthe

mouthpiece of the hot air gun;

• Keepchildrenandanimalsawayfromthe

appliance if you are using it.

Immediately switch off the appliance when:

• Plugand/orcablearedefectiveordamaged;

• Theswitchisdefective;

• Yousmellorseesmokecausedbyscorched

insulation from the hot air gun.

Electrical safety

When using electric machines always observe the

safety regulations applicable in your country to

reduce the risk of fire, electric shock and personal

injury. Read the following safety instructions and

also the enclosed safety instructions.

Always check that the power supply

corresponds to the voltage on the rating

plate.

Class II machine – Double insulation –

You don’t need any earthed plug

Replacing cables or plugs

Immediately throw away old cables or plugs

when they have been replaced by new ones. It is

dangerous to insert the plug of a loose cable in

the wall outlet.

Using extension cables

Only use an approved extension cable suitable

for the power input of the machine. The minimum

conductor size is 1.5 mm

. When using a cable

reel always unwind the reel completely.

3. Using the appliance

The Hot air gun can be used for:

• Plumbingworkliketubeconnections,solder,

bowing tubes;

• Removingpaint,varnishandlacquerwithout

firerisk;

• Quicklydryingofapplianceswhichhave

become wet;

• Dryingsurfacesforquickrepairing;

• Removingself-adhesivelabelsinacleanway

placing PVC labels;

• BlisteringafterstickingPVCmaterialscanbe

smoothed after heating;

• Easyremovingofvinylcarpeting:

• Formingallsyntheticswithalowtemperature

(450 degrees) among which polyethylene and

PVC;

• Formingallsyntheticswithahightemperature

(580 degrees) among which acryl and

plexiglass;

• Smeltingsynthetics,amongwhichmatters

and foils with PVC layer;

• Applyingheatshrinkingtubes;

• Shrinkwrappers;

• Thawingtubesandengines;

• Repairingfinishinglayers:emailofbathand

household appliances;

• Applyingepoxypowdercoverlayers;

• Repairingofski’s,surf-boardsandother

sports goods;

• Unscrewingtoofastfixedscrewsand

connections.

Operation

Fig. A

Youcanworkmanuallywiththishotairgunoryou

can put it in a vertical position.

• Checkifthemainsswitchisonposition“0”

before you connect the apparatus;

• Keepthemainleadalwaysawayfromthehot

air stream and the mouth piece;

• Putthemainsswitchinposition‘IorII’tolet

your hot air gun operate:

“I” = 450 degrees, air flow 300 l/min.

“0” = Off

“II” = 600 degrees, air flow 500 l/min.

When the temperature is excess 600° C, the

heats switches it off automatically, however, the

heater continues to run. When the heater has

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ferm HDM1014 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,99 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ferm HDM1014 Manual

Product: