Manual Ferm HDM1007 - FBH-850KN (page 15 of 42) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish)

763653

Zoom out

Zoom in

1/42

Ferm 15

Maschinen sind so konzipiert, dass sie lange Zeit bei minimalem Wartungsaufwand

problemlos funktionieren. Durch regelmäßiges Reinigen und sachgerechte Behandlung

verlängern Sie die Lebensdauer Ihrer Maschine.

Beschädigungen

Die Maschine sollte regelmäßig auf die nachfolgenden möglichen Beschädigungen überprüft

und ggf. repariert werden.

• Beschädigungen am Netzkabel

• Defekt des Ein/Aus-Schalterdrückers

• Kurzschlüsse

• Beschädigungen an beweglichen Teilen.

Störungsbeseitigung

• Der Motor läuft nicht,

obwohl die Maschine

eingeschaltet ist.

• Motor erzeugt laute

Geräusche und läuft zu

langsam oder gar nicht.

• Überhitzung des

Getriebegehäuses.

• Keine

Spannungsversorgung.

• Wackelkontakt im

Ein/Aus-

Schalterdrücker.

• Zu niedrige

Netzspannung.

• Motorschaden.

• Abgenutzte

Kohlebürsten.

• Motor durch zu starken

Druck oder zu große

Bohrtiefe überlastet.

• Motorschaden.

• Zu niedrige

Netzspannung.

• Abgenutzte

Kohlebürsten.

• Überprüfen Sie die

Spannungsversorgung.

• Reparieren oder

ersetzen Sie den

Schalterdrücker.

• Verlängerungskabel zu

lang oder

unterdimensioniert.

• Lassen Sie Ihre

Maschine von einem

Fachmann reparieren.

• Ersetzen Sie die

Kohlebürsten.

• Verringern Sie den Druck

oder die Bohrtiefe,

reduzieren Sie die

Leistung.

• Lassen Sie Ihre

Maschine von einem

Fachmann reparieren.

• Netzspannung

regulieren.

• Ersetzen Sie die

Kohlebürsten.

70 Ferm

• Skyv låsehylsen (11, Fig. A) bakover, og sett biten inn i chuckåpningen. Pass på at sporene

i biten settes riktig i chucken ved å dreie forsiktig på biten til den klikker på plass. Utløs

låsehylsen.

• Du fjerner biten ved å skyve låsehylsen bakover og holde den der.

Stille inn dybdemåleren

Fig. A

• Løsne håndtaket ved å dreie det mot klokken.

• Sett dybdemåleren inn gjennom hullet i støttehåndtaket.

• Skyv måleren til ønsket dybde.

• Stram skruen godt.

Funksjonsvalgbryter

Fig. C

Riktig posisjon for valgbryteren for hver maskinfunksjon angis i diagrammet (fig. C) på side 2.

1 = Demoleringshammer/meisel

2 = Slagdrill

3 = Drilling

Slå På/Av

• Du starter drillen ved å klemme på på/av-knappen.

• Du stanser drillen ved å slippe på/av-knappen.

Montere støvoppsamler

Fig.D

Støvoppsamleren forhindrer borestøv fra å komme inn i maskinen ved boring i tak.

• Ta av drillbiten.

• Skyv støvoppsamleren over akselen til drillbiten.

• Sett drillbiten med støvoppsamleren i chucken

• Bytt alltid skadede støvoppsamlere umiddelbart.

4. VEDLIKEHOLD

Pass på at maskinen ikke er koplet til strømtilførselen når du utfører vedlikehold på

mekaniske deler.

Maskinene er utformet for problemfri funksjon over lang tid med minimalt med vedlikehold. Ved

å rengjøre maskinen regelmessig og behandle den riktig, bidrar du til å sørge for en lang

levetid.

Defekter

Maskinen må undersøkes regelmessig for følgende mulige defekter og repareres om

nødvendig.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ferm HDM1007 - FBH-850KN in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 3,9 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ferm HDM1007 - FBH-850KN Manual

Product: